arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

PAVELAB GYROCOMP, gyratory compactor

THE THIRD GENERATION OF GYRATORY COMPACTORS FOR DEMANDING HIGH PRODUCTIVITY LABORATORIES

EN 12697-10 | EN 12697-31 | AASHTO T312 | SHRP M-002 | ASTM D6925

Gyrocomp Gyratory Compactor
Gyrocomp Gyratory Compactor and PC
Cylinder moulds
Cyinder moulds for cold mix compaction
Example of display
Low noise air compressor
Cylinder mould for Gyrocomp

Main Features

  • High productivity
  • Compact and lightweight, also ideal for mobile laboratories
  • High reliability and accuracy
  • Certified to EN and AASHTO
  • Approved as Superpave™ Gyratory Compactor in U.S.A.
  • Integrated touch-screen control panel with large display
  • Sliding transparent door
  • Full safety and ergonomic design
  • Integrated electromechanical extruder option
  • 2 years full warranty
  • tecnical specifications
    • Scroll the table
      • Compacted specimen size: 150 and 100 mm dia.
      • Sample height: 80 to 200 mm (150 mm)-50 to 125 mm (100 mm)
      • Consolidation pressure: 80 to 800 kPa (150 mm) -160 to 1400 kPa (100 mm)
      • Internal angle of gyration: Adjustable from 0.70 to 1.40 °.
        Preset to 1.16° internal angle ( 76-B2522,  ASTM/AASHTO models)
        Preset to 0.82° internal angle (76-B2522/E,  EN models)
      • Speed of gyration: adjustable from 15 to 60 rpm
      • Number of gyrations: adjustable up to 999
      • Test programmable either by number of gyrations or specimen height
      • Communication with PC: RS 232 connections
      • Internal memory: thousands of tests
      • Power rating: 1000 W
      • Dimensions (including extruder bench, wxdxh): 502x753x1940 mm
      • Dimensions (wxdxh): 469x615x1130 mm
      • Weight approx.: 100 kg
  • ordering info
    • 76-PV2522 
      PAVELAB GYROCOMP gyratory compactor, internal angle of gyration preset to 1.16° to AASHTO T312/ASTM D6925. 230-110 V, 50-60 Hz, 1 ph


      76-PV2522/E 
      PAVELAB GYROCOMP gyratory compactor, internal angle of gyration preset to 0.82° l to EN 12697-31 Annex C.
      230-110 V, 50-60 Hz, 1 ph

      Note
      All models basically comply to EN 12697-10, EN 12697-31, ASTM D6925, AASHTO T312 and SHRP M-002. The only difference between the 76-PV2522  and the 76-PV2522/E  versions, is the angle of gyration, factory set to ASTM/AASHTO or to EN standards. This means that it is possible, with our intervention, to modify from one version to the other the angle of gyration.
  • accessories
    • Cylinder moulds and distance plates

      76-PV0250/2
      Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded. Complete with top and bottom plates.

      76-PV0250/5
      Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded. Complete with top and bottom plates.

      76-PV0250/10
      Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates

      76-PV0250/8
      Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates

      76-PV0250/3 
      Distance plate, 150 mm dia., 50 mm high, for preparing short samples

      76-PV0250/6 
      Distance plate, 100 mm dia., 38 mm high, for preparing short samples

      76-PV0250/4 
      Accessories to compact 100 mm dia. specimens including 100 mm height calibration device
       
      Integrated work top with extruder

      76-PV2520/15 
      Integrated work top with electromechanical specimen extruder. 230 V, 50-60 Hz, 1 ph

      76-PV2520/15Z 
      Integrated work top with electromechanical specimen extruder. 110 V, 60 Hz, 1 ph

      Description
      The work top with extruder fits perfectly the PAVELAB GYROCOMP resulting in an ergonomic solution for the operator. Electromechanical motor speed reducer, 550 W electric motor, producing a maximum load of ----- which is essential for cold mix specimens requiring a much bigger extrusion capacity.
      • Dimensions: 502x753x808(h) mm
      • Weight approx.: 45 kg
      76-PV0252/14 
      Integrated work top with manual extruder
       
      Air compressor

      76-PV0250/7 
      Low noise air compressor. 230 V, 50 Hz

      76-PV0250/7Y 
      Low noise air compressor. 220 V, 60 Hz

      76-PV0250/7Z 
      Low noise air compressor. 110 V, 60 Hz

      Description
      10 bar max. pressure, 130 l/min air delivery, 10 l cap., power rating 750 W, silent operation (less than 59 dB, ISO 3744, r=4 m).
      • Overall dimensions (wxdxh): 370x410x650 mm
      • Weight approx.: 27 kg

Related products

New products

Where we are


Follow us on