AUTOMAX E-Modulus console for Elastic Modulus and Poisson ratio determination

ISO 6784 | ASTM C469 | DIN 1048 | UNI 6556 | EN 13412 | EN 13286-43 | EN 12390-13 | BS 1888: 121

50-C20E82 AUTOMAX E-Modulus controlling a EN compression frame with three electronic compressometer-extensometer fitted to a cylindrical specimen
AUTOMAX E-Modulus automatic control console, code 50-C20E82
Elastic modulus test performed according to EN 12390-13 (Procedure A)
Elastic modulus test performed according to customized sequence of steps to fulfill any test procedure
Detail of stress/strain graph showing measurements of each transducer and avarage readings (dashed red line)
50-C10D/3F AND 50-C20E/4F hydraulic valves for connection and control of four frames
50-C20E82 AUTOMAX E-Modulus connected to four testing frames
AUTOMAX E-Modulus. Determination of modulus of elasticity
Detail of electronic boards housed in the removable drawer of Automax E-Modulus console
Determination of Elastic Modulus using surface-mounted strain gauges

Main Features

  • E-MODULE software for automatic determination of Modulus of Elasticity and Poisson's ratio
  • DATAMANAGER software for automatic execution of compression, flexure and indirect tensile tests
  • E MODULE software allows user defined test cycles and automatic verification of sample centering
  • Test cycle with closed loop digital feedbacks automatically performed by pressing the start button via PC
  • Soft platen-to-specimen contact and smooth load rate control from every beginning of the ramp
  • Double frame control, expandable to four, with active frame selection via software
  • Double stage hydraulic pump with rapid approach and precise oil flow control allowing high throughput of accurate test (up to 40/hour)
  • Flow-sharing technology for the execution of loading and unloading cylces
  • Adopts the latest ES (Energy Saving) technology for reduction of power consumption and silent operation
  • Connects to laboratory network via LAN port/Software
  • Automatic software calibration procedure
  • Internet remote technical assistance and diagnostic
  • Ready to perform automatic tensile test on steel specimens once upgraded with tensile test kit including a suitable testing frame and accessories. Ask our technical department for more details
  • tecnical specifications
    • Scroll the table
      • Dual stage pump: centrifugal low pressure for fast approach and automatic switching to radial multi-piston high pressure for loading
      • DC motor. 720 W, 50-60 Hz
      • Maximum working pressure 650 bar
      • Third and fourth frame option, active frame selection by software
      • Flow-sharing technology to perform loading and unloading cycles
      • ES Energy Saving technology to reduce power consumption and silent operation

      • 131.000 points effective resolution
      • Closed-loop P.I.D. control
      • 4 channels for load sensors (pressure transducers and load cells)
      • 6 channels to measure strain values with transducers (LVDT, magnetostrictive, potentiometetric)
      • 4 channels for strain measurement with strain gauges
      • Memorization of the calibration curve enables sensors to be connected and used immediately
      • Digital linearization of the calibration curve (multi-coefficient)

      • fully PC controlled
      • E-MODULE and DATAMANAGER software packages included
      • DATAMANAGER: software dedicated to compression, indirect tensile, 3 point and 4 point flexural tests on different types of specimens
      • E-MODULE software dedicated to Elastic modulus and Poisson ratio determination allowing:
        • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure
        • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs
        • Automatic verification of sample centering and sensors functionality, as per standard requirements
        • Real time and deferred management of tests data and results, either in numeric and in graphic format 
        • Active frame selection via software 
        • Printing and saving of customized test reports both for single and batch tests in Excel form
      • Multi-language software, customizable with a further local language (only latin characters)
      • Diagnostic system to highlight system malfunctions allowing remote service via Internet (if available)
      • The PC may be connected to the digital readout unit mod. 82-P0801/E and the suitable load cells in order to perform automatic load measurement verification procedure including data acquisition and printing of traceable calibration certificates.
  • ordering info
    • 50-C20E82
      Automax E-Modulus stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included.
      230 V, 50-60 Hz, 1 ph. 

      Automax E-Modulus stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included.
      110 V, 60 Hz, 1 ph.
  • accessories

Related products

New products

Our locations

Follow us on