arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

EN 12390-4, EN 772-1 Compression frames

EN 12390-4

EN 3000kN compression frame model 50-C56Z00 with distance pieces and cube specimen
EN 4000kN compression frame model 50-C68Z00
EN high stiffness pre-stressed 3000kN compression frame model 50-C86Z00
Schematic balanced pre-tensioning system
EN 2000kN compression frame model 50-C47Z00 connected to AUTOMAX Smart Line control console for block testing
EN high stiffness 5000kN frame model 50-C79Z00 for block testing
Lifting device for bottom block compression platen model 50-C9060/b
  • tecnical specifications
    • Scroll the table
      EN 12390-4 Testing frames for cylinders, cubes
      Models
      50-C46Z00

      50-C56Z00

      50-C68Z00**

      50-C78Z00**
      Capacity kN 2000 3000 4000 5000
      Platens dia. mm 300 300 305x305 (sq.) 305x305 (sq.)
      Surface hardness (1) 53 HRC 53 HRC 53 HRC 53 HRC
      Flatness tolerance, mm 0.03 0.03 0.03 0.03
      Ram travel mm 50 50 50 50
      Max. vertical daylight mm* 350 350 520 520
      Horizontal
      daylight mm
      350 370 425 425
      For specimen size cm
       
      Cubes:
      Cylinders:
       
       
      10, 15, 20
      10x20, 15x30, 16x32
       
       
      10, 15, 20
      10x20, 15x30, 16x32
       
       
      15, 20, 30
      15x30, 16x32, 25x50
       
       
      15, 20, 30
      15x30, 16x32, 25x50
      Overall dim.
       (lxdxh) mm
      530x310x1500
      (incl. pedestal)
      600x370x1500
      (incl. pedestal)
      705x445x1500 705x445x1500
      Weight approx. kg 740 970 1950 1950
      * To be adjusted using the suitable distance pieces. See accessories.
      ** If this frame and a second frame (cement or flexural) are both connected to AUTOMAX or PILOT Smart-Line control console, the pressure regulator model 65-L1400/X5 has to be used. See Upgrading options.
      (1) Hardness certificate available on request, see Upgrading options

      EN 12390-4, EN 772-1 Testing frames for cylinders, cubes, and blocks
      Models
      50-C47Z00

      50-C57Z00

      50-C67Z00**

      50-C77Z00**

      50-C69Z00**

      50-C79Z00*
      Capacity kN 2000 3000 4000 5000 4000 5000
      Platens dim. 310x510x50 mm 310x510x50 mm 310x510x50mm 310x510x50 mm 310x510x90mm 310x510x90mm
      Surface hardness (1) 55.5 HRC 55.5 HRC 55.5 HRC 55.5 HRC 55.5 HRC 55.5 HRC
      Flatness tolerance, mm 0.05 0.05 0.05 0.05 0.05 0.05
      Ram travel mm 50 50 50 50 50 50
      Max. vertical daylight mm* 360 350 520 520 310 310
      Horizontal
      daylight mm
      350 370 425 425 425 425
      For specimen size cm
       
      Cubes:
      Cylinders:

      Blocks
       
       


      10, 15, 20
      10x20, 15x30, 16x32
      up to 500x300
       


       
      10, 15, 20
      10x20, 15x30, 16x32
      up to 500x300
       


       
      15, 20, 30
      15x30, 16x32, 25x50
      up to 500x300
       
       


      15, 20, 30
      15x30, 16x32, 25x50
      up to 500x300




      15, 20, 30
      15x30

      up to 500x300




      15, 20, 30
      15x30

      up to 500x300
      Overall dim.
       (lxdxh) mm
      650x610x1530
      (incl. pedestal)
      740x640x1550
      (incl. pedestal)
      845x570x1550 845x570x1550 845x570x1550 845x570x1550
      Weight approx. kg 725 1100 1960 1960 2000 2000
      * To be adjusted using the suitable distance pieces. See accessories.
      ** If this frame and a second frame (cement or flexural) are both connected to AUTOMAX or PILOT Smart-Line control console, the pressure regulator model 65-L1400/X5 has to be used. See Upgrading options.
      (1) Hardness certificate available on request, see Upgrading options

      EN 12390-4, 4-prestressed-columns testing frames
      Models
      50-C86Z00

      50-C86Z10*
      Capacity kN 3000 3000
      Platens dia. mm 300 300
      Surface hardness (1) 53 HRC 53 HRC
      Flatness tolerance, mm 0.03 0.03
      Ram travel mm 50 50
      Max. vertical daylight mm* 350 350
      Horizontal
      daylight mm
      330 330
      For specimen size cm
       
      Cubes:
      Cylinders:
       
       
       
      10, 15, 20
      10x20, 15x30, 16x32                           
       
       
      10, 15, 20
      10x20, 15x30, 16x32                          
      Overall dim.
       (lxdxh) mm
      560x380x1400
      (incl. pedestal)
      560*380x1400
      (incl. pedestal)
      Weight approx. kg                                                            1040 1150
      *Strain gauge load cell incorporated in the piston
      (1) Hardness certificate available on request, see Upgrading options

  • ordering info
    • EN 12390-4 Testing frames for cylinders, cubes

      2000 kN cap.
      50-C46Z00      
      2000 kN cap. compression frame, for cubes up to 200 mm and cylinders up to dia., 160x320mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer) and base.

      3000 kN cap.
      50-C56Z00      
      3000 kN cap. compression frame, for cubes up to 200 mm and cylinders up to dia., 160x320mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer) and base.

      4000 kN cap.
      50-C68Z00     
      4000 kN cap. compression frame, for cubes up to 300 mm and cylinders up to dia., 250x500mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer).

      5000 kN cap.
      50-C78Z00      5000 kN cap. compression frame, for cubes up to 300 mm and cylinders up to dia., 250x500mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer).
       
      EN 12390-4, EN 772-1 Testing frames for cylinders, cubes, and blocks
      2000 kN cap.
      50-C47Z00    
      2000 kN cap. compression frame for blocks, cubes up to 200 mm and cylinders up to dia. 160x320 mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer) and base.

      3000 kN cap.
      50-C57Z00    
      3
      000 kN cap. compression frame for blocks, cubes up to 200 mm and cylinders up to dia. 160x320 mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer) and base.

      4000 kN cap.
      50-C67Z00    
      4000 kN cap. compression frame for blocks, cubes up to 300 mm and cylinders up to dia. 250x500  mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer).

      5000 kN cap.
      50-C77Z00    
      5000 kN cap. compression frame for blocks, cubes up to 300 mm and cylinders up to dia. 250x500  mm, tested for stability to EN 12390-4. Supplied complete with connection kit to separate control console (including pressure transducer).

       4000 kN cap. (Heavy duty model)
      50-C69Z00     
      4000 kN cap. compression frame for blocks, cubes up to 300 mm and cylinders up to dia. 150x300  mm.
      Featuring Premium heavy duty spherical seta and compression platens with 90mm thickness.
      Supplied complete with connection kit to separate control console (including pressure transducer).

      5000 kN cap. (Heavy duty model)
      50-C79Z00     
      5000 kN cap. compression frame for blocks, cubes up to 300 mm and cylinders up to dia. 150x300  mm. 
      Featuring Premium heavy duty spherical seta and compression platens with 90mm thickness.
      Supplied complete with connection kit to separate control console (including pressure transducer).

      EN 12390-4, 4-prestressed-columns testing frames

      3000 kN cap.
      50-C86Z00     
      3000 kN cap., four pre-stressed column high stiffness compression frame, for cubes up to 200 mm and cylinders up to dia. 160x320 mm, tested for stability to EN 12390-4.Supplied complete with connection kit to separate control console (including pressure transducer) and base.

      3000 kN cap. (with load cell)
      50-C86Z10      
      3000 kN cap., four prestressed column high stiffness compression frame, for cubes up to 200 mm and cylinders up to dia. 160x320 mm, tested for stability to EN 12390-4. Load cell incorporated in the piston. Supplied complete with connection kit to separate control console and base.
  • accessories
    • TEST ACCESSORIES

      \#splitting-tensile-test-devices\#

      50-C9000/B
      Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3”x12.6”).Conforming to EN 12390-6 and ASTM C496

      50-C9002
      Hardboard strips 4 x 14 x 345 mm for 50-C9000/B conf. to EN Standards. Pack of 50.

      50-C9002/A
      Hardboard strips 4 x 14 x 345 mm for 50-C9000/B conf. to ASTM Standards. Pack of 50.

      50-C9070/B
      Splitting tensile test device for concrete block pavers and concrete cubes. Conforms to EN 1338 and EN 12390-6.

      \#compression-devices-for-cement-and-mortars\#

      50-C9030/H
      Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. High stiffness model.
      Total height 225mm.

      50-C9030
      Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. Total height 192mm.

      50-C9032/H 
      Compression device to test 50mm (2”) cubes to ASTM C109. High stiffness model.
      Total height 225mm.

      50-C9032
      Compression device to test 50mm (2”) cubes to ASTM C109. Total height 192mm.

      \#flexural-test-device-for-concrete-beams\#

      50-C9010/C 
      Flexural test device for concrete beams 100x100x400/500 and 150x150x600/750 mm, to EN 12390-5, ASTM C78, ASTM C293 and AASHTO T97

      \#distance-pieces-to-adjust-the-vertical-daylight\#

      50-C9080 
      Distance piece dia. 200x30 mm

      50-C9082 
      Distance piece dia. 200x50 mm

      50-C9083 
      Distance piece dia. 200x68 mm

      50-C9086 
      Distance piece dia. 200x100 mm

      Note: The above distance pieces are also available with threaded centering pin which are recommended for testing high strength/ explosive failures specimens. They are identified adding the suffix /P after the code number.

      MACHINE ACCESSORIES

      Lifting assembly for block testing platens 
      This accessory is used for easier placement of distance pieces which can be used, when necessary, to reduce the vertical clearance of the machines/
      frames.
       
      50-C9060/A
      Lifting device for bottom block platen for easier placement pieces compatible platen size 310 x 510 x 50 mm thickness. Weight: 19 kg (approx.)
       
      50-C9060/B
      Lifting device for bottom block platen for easier placement of distance pieces compatible platen size 310 x 510 x 90 mm thickness. Weight: 18 kg (approx.)

       

New products

Our locations


Follow us on