arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

MCC, multifunctional control console

MCC advanced servo hydraulic control console for static and low frquency dynamic test on building materials complete with PC and PC cabinet
Complete testing system with 4 frames connected to the same unit
Main screen of the E-Modulus software
Stress vs Strain diagram
Deviation of the strain values measured by each transducer compared to the average reading (red line)
Detail of MCC display used basically for calibration purpose
Calibration menu
Detail of rear panel of MCC series
Specimen fitted with 55-C0222/F compressometers
MCC console upgraded with 50-C7022/UP2 distribution block for connection to up to 4 frames (mcc)

Main Features

  • Completely automatic execution of Compression, Flexure and Indirect tensile tests as well as test cycles to determine the ELASTIC MODULUS
  • MCC Multitest version also suitable for tests under displacement and strain control.
  • Can control up to 2 test frames extendable to 4 with the suitable upgrade
  • Dual control system through PC and keyboard display
  • Multi-language software with facility to introduce user defined text (Latin alphabet only)
  • tecnical specifications
    • Scroll the table
      Hydraulic group
      Dual stage pump, 700 bar max. pressure, 2 hydraulic outputs extendable to 4 with the accessories 50-C7022/UP1 and /UP2 (See Upgrading Options), Servo-control system for load control with proportional valve.

      Hardware and on board firmware
      • Resolution 132000 divisions, Closed loop control with high frequency PID.
      • 4 channels for deformation sensors used in  Elastic Modulus determination (normally strain gauges or digital compressometers).
      • Diagnostic menu to identify possible problems
      • Saving of calibration curves of the different sensors
      • Digital linearity of calibration curves with automatic selection of coefficients
      User interface
      The system is controlled via the PC. An alphanumerical keyboard and an icon driven display are also provided for factory settings and use of unit in local mode.
      • Graphical display 320x240 pixel
      Software
      Designed for the remote control of the machine all over the test conforming to the reference Standards. Allows selection of the active frame.
      The MCC Classic version permits the execution, using the appropriate testing frame and accessories, of the following tests and relevant Standards:
      • Compression test: EN 12390-3, EN 196, ASTM C39, ASTM C109, ASTM C349, AASHTO T22
      • Flexural test: EN 1339, EN 1340, EN 12390-5, ASTM C78, ASTM C293, AASHTO T97
      • Splitting tensile test: EN 1338, EN 12390-6, ASTM C496 
      • Elastic Modulus of concrete: ASTM C469, ISO 6784, DIN 1048, BS 1881:121, UNI 6556, 
      EN 12390-xx, EN 13412, EN 13286:43
      The Datamanager software features:
      Automatic execution of compression, flexural and splitting tensile tests on concrete and building materials. See \#data-manager-pc-software\#
      The E-Module software features:
      Automatic execution of tests for the determination of the Elastic Modulus. Fully customizable program, permits the configuration of load cycles conforming to the various Standards with high accuracy of measurements.
      The MCC Multitest version, further to the above , permits the execution , using the appropriate testing frame and accessories, of the following tests and relevant Standards:
      • Toughness of fiber reinforced concrete (FRC): ASTM C1550
      • Energy absorption of sprayed concrete: EN 14488-5, UNI 10834
      • Flexural strength of Shotcrete: EN 14488-3
      • Flexural strength of fiber reinforced concrete (FRC): EN 14641, ASTM C1609, C1018
       
      The Multitest software features:
      Automatic execution of fully customized tests under load/stress, displacement strain rate control which are for materials  such as fiber reinforced concrete (FRC) , Shotcrete, concrete elements lined with polymeric membranes, structural reinforcement elements. It is also possible to program sequence of steps with different feed- back parameters. All test parameters can be easily modified to meet the Standards requirements.
  • ordering info
    • 50-C8422/C
      MCC8 CLASSIC, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. PC and printer not included. 230 V, 50 Hz, 1 ph

      50-C8423/C
      MCC8 CLASSIC, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. PC and printer not included. 220 V, 60 Hz, 1 ph

      50-C8424/C
      MCC8 CLASSIC, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. PC and printer not included. 110 V, 60 Hz, 1 ph

      50-C8422/M
      MCC8 MULTITEST, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. Allows load, displacement and strain control. PC and printer not included. 230 V, 50 Hz, 1 ph

      50-C8423/M
      MCC8 MULTITEST, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. Allows load, displacement and strain control. PC and printer not included. 220 V, 60 Hz, 1 ph

      50-C8424/M
      MCC8 MULTITEST, stand alone closed loop control console for up to 2 test frames expandable to 4. Software included for compression, flexure, indirect tensile tests and Elastic Modulus determination. Allows load, displacement and strain control. PC and printer not included. 110 V, 60 Hz, 1 ph
  • accessories

New products

Our locations


Follow us on