Distance pieces to adjust the vertical daylight
Distance piece dia. 200x30 mm
Distance piece dia. 200x50 mm
Distance piece dia. 200x68 mm
Distance piece dia. 200x100 mm
the above distance pieces are also available with threaded centering pin which are recommended for testing high strength/ explosive failures specimens. They are identified adding the suffix /P after the code number.
Steel platen for capped cyliders
Lower compression platen dia.165 x 30 mm for testing capped cylinders dia.150 x 300 mm (6”x12”). Resulting compression machine vertical clearance is increased by 20 mm.
Fragment guard lock switch
Fragment guard lock switch. To prevent test execution with the front door (optional) open
Frame pedestal and front door
Accessories suitable for 50-
Frame pedestal (optional)
Front door (optional)
Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3”x12.6”). Conforming to EN 12390-6 and ASTM C496
Splitting tensile test device for concrete block pavers and concrete cubes. Conforms to EN 1338 and EN 12390-6.
Hardboard strips 4 x 14 x 345 mm for 50-C9000/B conf. to EN Standards. Pack of 50.
Hardboard strips 4 x 14 x 345 mm for 50-C9000/B conf. to ASTM Standards. Pack of 50.
Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. High stiffness model. Total height 225mm.
Compression device to test 50mm (2”) cubes to ASTM C109. High stiffness model. Total height 225mm.
Flexural test device for concrete beams 100x100x400/500 and 150x150x600/750 mm, to EN 12390-5, ASTM C78, ASTM C293 and AASHTO T97
This method is used as an alternative to the sulphur capping. The system consists of two alloy steel cap retainers and two neoprene pads which are in contact with the upper and lower concrete surfaces. Pads can be re-used for many tests. Different versions available conforming to the size of the specimen.
Capping retainers (couple) for 4” dia. concrete cylinders
Capping retainers (couple) for 150 mm (6”) dia. cylinders
Capping retainers (couple) for 160 mm dia. cylinders
Neoprene pads for 4” dia. cylinders. Set of two.
Neoprene pads for 6” dia. cylinders. Set of two.
Neoprene pads for 160 mm dia. cylinders. Set of two.