Distance pieces to adjust the vertical daylight
Distance piece dia. 165 x 20 mm
Distance piece dia. 165 x 30 mm
Distance piece dia. 165 x 40 mm
Distance piece dia. 165 x 68 mm
Distance piece dia. 96 x 158 mm
Fragment guard lock switch
Fragment guard lock switch. To prevent test execution with the front door open.
Frame pedestal and front door
Accessories suitable for 50-
Frame pedestal (optional)
Front door (optional)
Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3”x12.6”). Conforming to EN 12390-6 and ASTM C496
Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to EN Standards. Pack of 50.
Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to ASTM Standards. Pack of 50.
Compression device to test portions of 40x40x160 prisms broken in flexure to ASTM C349. High stiffness model. Total height 225mm.
Compression device to test 50mm (2”) cubes to ASTM C109. High stiffness model. Total height 225mm.
Flexural test device for concrete beams 100x100x400/500 and 150x150x600/750 mm, to EN 12390-5, ASTM C78, ASTM C293 and AASHTO T97
This method is used as an alternative to the sulphur capping. The system consists of two alloy steel cap retainers and two neoprene pads which are in contact with the upper and lower concrete surfaces. Pads can be re-used for many tests. Different versions available conforming to the size of the specimen.
Capping retainers (couple) for 4” dia. concrete cylinders
Capping retainers (couple) for 150 mm (6”) dia. cylinders
Capping retainers (couple) for 160 mm dia. cylinders
Neoprene pads for 4” dia. cylinders. Set of two.
Neoprene pads for 6” dia. cylinders. Set of two.
Neoprene pads for 160 mm dia. cylinders. Set of two.