arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

1000, 1200, 1500, 2000 kN UTM - HPT Series with HPU 200 control unit

The ideal solution for Central Laboratories

EN ISO 6892 | EN ISO 7500-1 | ASTM A370 | EN ISO 15630-1

Main Features

  • IDEAL FOR THE CONSTRUCTION INDUSTRY
    Particularly suitable, but not only, for the construction industry, to perform both tension tests on steel rounds and flats, and compression/transverse/splitting tests on concrete
  • COMPLETE RANGE
    From 1000kN up to 2000kN capacity
  • RUGGED FOUR COLUMN FRAME
    Extremely rigid four column frame with large vertical clearance suitable for tension and compression tests
  • FRONT OPEN CROSSHEAD
    For easy insertion of tensile specimens. The jaws and grips can be easily removed by just pulling from the front. Hydraulic gripping system operated by push button panel
  • HIGH ACCURACY WITH LOAD CELL
    Load measurement by high precision load cell providing high accuracy from the very beginning of load scale.
  • FULL RANGE OF ACCESSORIES
    available to perform various tests, including Extensometers, Transverse and Bending test apparatus for steel, Compression-Flexural and Indirect tensile test on concrete, etc. 
  • PC CONTROLLED
    Completely automatic test execution
  • SOFTWARE PACKAGES INCLUDED
    Supplied complete with management software and software packages concerning wide range of  tests on steel, concrete and other construction material. 
  • SECOND FRAME CONTROL
    Normally adopted to connect concrete compression up to 5000kN capacity or flexural frame
  • tecnical specifications
    • Scroll the table
      TECHNICAL SPECIFICATIONS TABLE

      Model HTP-1000 HTP-1200 HTP-1500 HTP-2000
      Code 70-T10H02 70-T12H02 70-T15H02 70-T20H02
      Cap. 1000 kN 1200 kN 1500 kN 2000 kN
      Load sensor High accuracy load cell High accuracy load cell High accuracy load cell High accuracy load cell
      For rounds up to mm dia. 60 60 60 78
      Set of grips for rounds mm dia. 12 to 30
      25 to 38
      38 to 50
      50 to 60
      12 to 30
      25 to 38
      38 to 50
      50 to 60
      12 to 30
      28 to 40
      38 to 50
      50 to 60
      12 to 30
      30 to 42
      42 to 54
      54 to 66
      66 to 78
      For flats mm dia. 0 to 20 x 90
      20 to 40 x 90
      40 to 60 x 90
      0 to 15 x 100
      15 to 30 x 100
      30 to 45 x 100
      45 to 60 x 100
      0 to 15 x 100
      15 to 30 x 100
      30 to 45 x 100
      45 to 60 x 100
      0 to 18 x 100
      18 to 36 x 100
      36 to 54 x 100
      54 to 72 x 100
      Piston travel mm 250 250 250 300
      Max adjustable tensile daylight mm 50-850 50-850 50-850 50-850
      Max daylight between grippers mm* 600 600 600 550
      Max compression daylight (without accessories) mm 0-850 0-850 0-850 0-850
      Horizontal daylight mm 750 750 750 850
      Maximum piston speed (no load condition) mm/min 190 100 100 100
      Crosshead adjustable speed mm/min 360 @ 50 Hz
      430 @ 60 Hz
      275 @ 50 Hz
      330 @ 60 Hz
      275 @ 50 Hz
      330 @ 60 Hz
      270 @ 50 Hz
      325 @ 60 Hz
      Load resolution kN 0,01 0,02 0,02 0,02
      Crosshead displacement resolution mm 0,01 0,01 0,01 0,01
      Machine class 1 range
      (EN ISO 7500-1)
      10-1000 kN 12-1200 kN 15-1500 kN 20-2000 kN
      Overall dimensions: 
      Frame, l x d x h

      Console, l x d x h

      1,1 x 0,66 x 3,0/3,25
      0,8 x 0,9 x 1,55

      1,2 x 0,9 x 3,25/3,5
      0,8 x 0,9 x 1,55

      1,2 x 0,9 x 3,25/3,5
      0,8 x 0,9 x 1,55

      1,5 x 1,0 x 3,7/4,0
      0,8 x 0,9 x 1,55
      Weight approx.:
      Frame kg
      Console kg

      3700 kg
      180 kg

      6000 kg
      180 kg

      6000 kg
      180 kg

      8000 kg
      180 kg
      *Max distance between grips to exploit the full pisotn travel

      HPU POWER AND CONTROL CONSOLE
      Hardware
      • 131.000 points effective resolution
      • Control frequency 250 Hz
      • Sampling rate 500 Hz
      • Closed-loop P.I.D.control
      • 6 channels (one dedicated to crosshead displacement) to measure elongation/displacement/strain with potentiometric, conditioned LVDT and magnetostrictive transducers
      • 4 channels for strain measurements with strain gauges
      • 2 channels for load sensors: load cell and load  cell/pressure transducer of possible second frame
      • simple multi-sensors connection and calibration file selection
      • digital linearization of the calibration curve. (multi-coefficient)
      Hydraulics
      • Dual stage pump: centrifugal low pressure for fast approach (max. flow rate 9 l/min ) automatically switching to radial multi- piston high pressure (max. flow rate 3.2 l/min) for loading
      • Oil flow control by servo-controlled proportional valve
      • AC motor 3000 W
      • Maximum working pressure 700 bar
      • Oil temperature controlled by air cooling system
      • Console cabinet lined with soundproofing  material for operator's comfort.
      • Tank capacity: 30 liters
      MANAGEMENT SOFTWARE AND SOFTWARE PACKAGES 
      HPT Universal testers are supplied complete with RTM (Real Time Management) user interface environment allowing:
      • Remote control of the complete system for automatic test execution: quick platen approach, zeroing, test execution according to the selected test type, calculation of results, graphical and numerical management of results
      • Storage of single and multiple tests
      • Printing of customized test reports for both single and multiple tests
      • Real time and deferred management of tests data and results, either in numeric or in graphic format
      • Language selection (Latin characters only)
      • Units selection
      • Remote technical assistance/diagnostic via internet
      The following Software packages are also included in the system:
      • UTS Software Specifically designed for tensile testing under load/stress control and crosshead separation control (by using the displacement transducer supplied with the machine), allowing:
        • Simultaneous display of stress/time,  stress/elongation %, elongation/time and  stress/elongation;
        • Possibility to overlap two elongation/stress graphs: one obtained with the included displacement transducer measuring crosshead separation travel and the other obtained w ith an optional extensometer (coaxial or universal);
        • Elaboration of tension test results: ReH, ReL or  Rp (calculated at three different elongation percentages selectable by the user), A, Ag, At, Agt, Ae, Rt, Z, elastic modulus E, etc, conforming to EN ISO 6892-1 and EN 15630-1 for steel rebars.
      • DATAMANAGER Software For compression, flexure and indirect tensile test on concrete, cement specimens and other construction materials allowing:
        • Real time monitoring of test data and stress/time graph
        • Automatic load detection failure and storage
        • Cement testing to EN 196-1 guided test procedure
        • Saving of batch file with automatic calculation of average and standard deviation
      The following software package is included in the Upgrading option 70-T10/EM. It is also available as option when upgrading the machine with the hydraulic system for a second frame connection (see 70-T10/2F).  
      • E-MODULE software For Poisson ratio and Elastic Modulus determination on concrete specimens allowing:
        • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure
        • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs
        • Automatic verification of sample centering and sensors functionality, as per Standard requirements
        • Automatic calculation of Initial and Final secant Elastic Modulus values
  • ordering info
    • 1000kN CAPACITY

      70-
      T10H02
      HPT-1000, Automatic Computerized Universal Testing Machine, 1000 kN cap. HPU 200 control console. Load measurement by high precision load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 60 mm dia., three set of grippers for flats from 20 x 90 to 60 x 90 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials. 380 V, 50 Hz, 3 ph.

      70- T10H03
      Same as above but 380 V, 60 Hz, 3 ph

      70- T10H04
      Same as above but 220 V, 60 Hz, 3 ph

      1200kN CAPACITY

      70- T12H02
      HPT 1200, Automatic Computerized Universal Testing Machine, 1200 kN cap. HPU 200 control console. Load measurement by high precision load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 60 mm dia., four set of grippers for flats from 15 x 100 to 60 x 100 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials.
      380 V, 50 Hz, 3 ph.

      70- T12H03
      Same as above but 380 V, 60 Hz, 3 ph

      70- T12H04
      Same as above but 220 V, 60 Hz, 3 ph
       
      1500kN CAPACITY

      70- T15H02
      HPT 1500, Automatic Computerized Universal Testing Machine, 1500 kN cap. HPU 200 control console. Load measurement by high precision  load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 60 mm dia., four set of grippers for flats from 15 x 100 to 60 x 100 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials.
      380 V, 50 Hz, 3 ph.
       
      70- T15H03
      Same as above but 380 V, 60 Hz, 3 ph

      70- T15H04
      Same as above but 220 V, 60 Hz, 3 ph

      2000kN CAPACITY 

      70- T20H02
      HPT 2000, Automatic Computerized Universal Testing Machine, 2000 kN cap. HPU 200 control console. Load measurement by high precision  load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 78 mm dia., four set of grippers for flats from 18 x 100 to 72 x 100 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials.
      380 V, 50 Hz, 3 ph.

      70- T20H03
      Same as above but 380 V, 60 Hz, 3 ph

      70- T20H04
      Same as above but 220 V, 60 Hz, 3 ph
  • accessories
    • ELECTRONIC COAXIAL EXTENSOMETERS
      70-C0961/F
      Coaxial electronic extensometer for round specimens from 4 to 16 mm dia.              
      Gauge length: 200 mm. Travel: 50 mm.      

      70-C0961/G
      Coaxial electronic extensometer for round specimens from 16 to 40 mm dia.              
      Gauge length: 200 mm. Travel: 75 mm.                              

      70 C0961/E
      Coaxial electronic extensometer to measure the elongation of strands from 9 to 15,2mm dia. up to failure. Gauge length: 600 mm; Max travel: 50 mm. 

      UNIVERSAL EXTENSOMETERS
      70-C0954/C1
      Standard electronic extensometer.
      Fitted with high precision electronic linear transducer. Maximum travel 10 mm, measuring base 200 mm. It has to be removed before sample failure.
       
      70-C0953/C
      Mechanical extensometer. Suitable flat samples up to 40 x 40 mm, rounds from 0.4 mm to 40 mm diameter. Base length: 50, 100 and 200 mm. Dial gauge 10 x 0.01mm.

      SMALL AND BIG SHEAR TEST ATTACHMENT
      70-T10/SH
      Small and big shear test attachment.

      SHOULDERED AND THREADED SPECIMENS TEST ATTACHMENT
      Standard: ASTM E8
      70-T10/ST
      Shouldered and Threaded specimens test accessory.
       
      NUT AND BOLT TEST ATTACHMENT
      Standards: ASTM F606, ISO 898-1
      70-T10/NB
      Nut and bolt test accessory for specimens from M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27,  M30, M33.
      Suitable for 70-T10H0x, 70-T12H0x and 70-T10T0x models.

      70-T20/NB 
      Nut and bolt test accessory for specimens from M6, M8, M10, M12, M14, M16, M18, M20, M22, M27, M27,  M30, M33, M39, M42, M45, M48, M52, M56 and M64 (max 12.9 grade).

      COMMON 180° & BEND REBEND TEST ATTACHMENT
      Standards: ASTM A615, EN 10080
      70-T10/BEN
      Common 180° & Bend Rebend Test attachment for bar up to 40 mm dia. 

      70-T10/50
      Loading element dia. 50 mm       
      N.B. loading elements ranging from dia.16mm up to dia.320mm available on request.

      WIRE ROPE TEST ATTACHMENT 
      Standards: ISO 3108, ASTM A1023
      70-T10/WR
      Wire rope tensile test attachment for wire ropes up to 10 mm dia.

      ACCESSORY FOR ELECTROWELDED SCREEN 
      70-C0901/20
      Test accessory for electrowelded  steel screen. Used with the standard grips for flat specimens.

      BRINELL TEST ATTACHMENT
      70-T10/BR
      Brinell test attachment, including 10 mm ball indentor.

      PULL OUT TEST OF STEEL REBARS
      Standards: ASTM A944
      70-T10/PO
      Pull out test attachment for concrete with 4 Nos of Sensors

      TEST ACCESSORY FOR SMALL ROUNDS (<12MM DIA) 
      70-T10/1
      Set of inserts for round dia. 5-12 mm (4 Pcs).

      ELASTIC MODULUS DETERMINATION ON CONCRETE 
      Standards: ASTM C469, EN 12390-13, ISO 6784, DIN 1048, BS 1888:121, UNI 6556

      55-C0222/G 
      Electronic universal compressometer-extensometer for cylinders and prisms. Supplied with adapter for small speci­mens, template for correct mounting and elastic bands holding the devices onto the specimen.
      NOTE: Other sensor types (such as strain gauges) are available on request. Ask our technical department.
       
      82-SW/EM
      E-MODULE Software for Poisson ratio and Elastic Modulus determination.
      Note: included in the upgrading option 70-T10/EM
       
      COMPRESSION TESTS ON CONCRETE SPECIMENS
      Standards: ASTM C39, AASHTO T22
      70-T10/CC
      Set of compression platens 216 mm dia., with spherical seats, for compression tests on concrete cubes up to 150 mm and cylinders up to dia. 160 x 320 mm.
       
      FLEXURAL TESTS ON CONCRETE SPECIMENS
      Standards: ASTM C78, AASHTO T97, EN 12390-5
      50-C9010/B
      Flexural device for concrete beams 100x100x400/500 mm and 150x150x600/700 mm.
       
      SPLITTING TEST (INDIRECT TENSILE) ON CONCRETE SPECIMENS
      Standards: ASTM C496, EN 1338, EN 12390-6
      50-C9000/B
      Splitting tensile test device for cylinders up to dia. 160x320 mm, conforming to ASTM C496 and EN 12390-6.
      Weight approx..: 28 kg
       
      50-C9000/A
      Splitting tensile test device for cylinders  dia. 250x500 mm, conforming to  EN 12390-6.
      Weight approx..: 65 kg
       
      50-C9070/B
      Splitting tensile test device for cubes up to 150 and
       block pavers conforming to EN 1338  and EN 12390-6.
      Weight approx..: 28 kg
       
      50-C9002
      Hardboard packing strips 4x15x345 mm to EN1338 and EN 12390-6. Pack of 50.
       
      50-C9002/A
      Plywood packing strips 3x25x345 mm to ASTM C496. Pack of 50.
       
      50-C9001/A
      Hardboard packing strips 4x15x550 mm for 50-C9000/A. Pack of 50.
       

Related products

New products

Our locations


Follow us on