arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

1000 kN UTM - HPT Series with AUTOMAX T control unit

Ideal for the commercial laboratories and educational purposes

EN ISO 6892 | EN ISO 7500-1 | ASTM A370 | EN ISO 15630-1

Main Features

  • HIGH FLEXIBILITY
    Performs both tension tests on steel rounds and flats, and compression/transverse/splitting/elastic modulus tests on concrete
  • RUGGED FOUR COLUMN FRAME
    Extremely rigid four column frame with large vertical clearance suitable for tension and compression tests
  • FRONT OPEN CROSSHEAD
    For easy insertion of tensile specimens. The jaws and grips can be easily removed by just pulling from the front. Hydraulic gripping system operated by push button panel
  • HIGH ACCURACY WITH LOAD CELL
    Load measurement by high precision load cell providing high accuracy from the very beginning of load scale.
  • FULL RANGE OF ACCESSORIES
    available to perform various tests, including Extensometers, Transverse and Bending test apparatus for steel, Compression-Flexural and Indirect tensile test on concrete, etc. 
  • PC CONTROLLED
    Completely automatic test execution
  • SOFTWATE PACKAGES INCLUDED
    Supplied complete with management software and software packages concerning wide range of  tests on steel, concrete and other construction material. 
  • tecnical specifications
    • Scroll the table
      TECHNICAL SPECIFICATIONS TABLE

      Model HTP-1000
      Code 70-T10T02
      Cap. 1000 kN
      Load sensor: High accuracy load cell
      For rounds  up to mm dia.: 60
      Set of grips for rounds dia. mm: 12 to 30
      25 to 38
      38 to 50
      50 to 60
      For flats dim. mm. : 0 to 20 x 90
      20 to 40 x 90
      40 to 60 x 90
      Piston travel mm. 250
      Max adjustable tensile daylight mm: 50-850
      Max daylight between grippers [mm]* 600
      Max. compression daylight (without accessories) mm.: 0-850
      Horizontal daylight mm.: 750
      Maximum piston speed (no load condition) mm/min: 55
      Crosshead adjustable speed [mm/min] 360 @50 Hz
      430 @60 Hz
      Load resolution [kN] 0.01
      Crosshead displacement resolution [mm] 0.01
      Machine class 1 range (EN ISO 7500-1) 10-1000 kN
      Overall dimensions:
      Frame,  LxDxH [m]
      Console, LxDxH [m]

      1,1 x 0,66 x 3,0/3,25
      0,8 x 0,9 x 1,55
      Weight approx.:
      Frame kg
      Console kg

      3700kg
      180 kg
      *Max distance between grips to exploit the full pisotn travel

      AUTOMAX T POWER AND CONTROL CONSOLE
      Hardware
      • 131.000 points effective resolution
      • Control frequency 250 Hz;
      • Sampling rate 500 Hz;
      • Closed-loop P.I.D.control
      • 6 channels (one dedicated to crosshead displacement) to measure elongation/displacement/strain with Potentiometric, conditioned LVDT and magnetostrictive transducers
      • 4 channels for strain measurements with strain gauges
      • 1 channel for load cell
      • simple multi-sensors connection and calibration file selection
      •  digital linearization of the calibration curve. (multi-coefficient)
       
      Hydraulics
      • Dual stage pump: centrifugal low pressure for fast approach (max. flow rate 2.5 l/min ) automatically switching to radial multi- piston high pressure (max. flow rate 0.9 l/min) for loading
      • DC motor 1100 W
      • Maximum working pressure 700 bar
      • Flow sharing technology to perform loading and unloading cycles
      • ES Energy saving technology to control the oil flow by regulating the DC mo9tor speed
      • Efficient noise reduction cabinet
      • Oil tank capacity 9 l
       
      MANAGEMENT SOFTWARE AND SOFTWARE PACKAGES 
      HPT Universal testers are supplied complete with RTM (Real Time Management) user interface environment allowing:
      • Remote control of the complete system for automatic test execution: quick platen approach, zeroing, test execution according to the selected test type, calculation of results, graphical and numerical management of results
      • Storage of single and multiple tests
      • Printing of customized test reports for both single and multiple tests
      • Real time and deferred management of tests data and results, either in numeric or in graphic format
      • Language selection (Latin characters only)
      • Units selection
      • Remote technical assistance/diagnostic via internet
      The following Software packages are also included in the system:
      • UTS Software Specifically designed for tensile testing under load/stress control and crosshead separation control (by using the displacement transducer supplied with the machine), allowing:
        • Simultaneous display of stress/time,  stress/elongation %, elongation/time and  stress/elongation;
        • Possibility to overlap two elongation/stress graphs: one obtained with the included displacement transducer measuring crosshead separation travel and the other obtained w ith an optional extensometer (coaxial or universal);
        • Elaboration of tension test results: ReH, ReL or  Rp (calculated at three different elongation percentages selectable by the user), A, Ag, At, Agt, Ae, Rt, Z, elastic modulus E, etc, conforming to EN ISO 6892-1 and EN 15630-1 for steel rebars.
      • DATAMANAGER Software For compression, flexure and indirect tensile test on concrete, cement specimens and other construction materials allowing:
        • Real time monitoring of test data and stress/time graph
        • Automatic load detection failure and storage
        • Cement testing to EN 196-1 guided test procedure
        • Saving of batch file with automatic calculation of average and standard deviation
      The following software package is available as option (82-SW/EM):  
      • E-MODULE software For Poisson ratio and Elastic Modulus determination on concrete specimens allowing:
        • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure
        • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs
        • Automatic verification of sample centering and sensors functionality, as per Standard requirements
        • Automatic calculation of Initial and Final secant Elastic Modulus values
  • ordering info
    • 70-T10T02
      Automatic Computerized Universal Testing Machine, 1000 kN cap. AUTOMAX T control console. Load measurement by high precision load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 60 mm dia., three set of grippers for flats from 20 x 90 to 60 x 90 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials. 380 V, 50 Hz, 3 ph.
       
      70-T10T04
      Same as above but 220 V, 60 Hz, 3 ph


  • accessories
    • ELECTRONIC COAXIAL EXTENSOMETERS
      These extensometers are basically made from three separate aluminium tubular sections, joined telescopically to one another. The middle section, delimited by the larger diameter, determines the measuring base, which is 5 times the diameter of the specimen. The two end sections consist of two mechanisms for gripping the specimen. One carries the electrical extensometer, the other an anvil.

      70-C0961/A2
      Coaxial electronic extensometer for round specimens from 5 to 11,5 mm dia.


      70-C0961/B2
      Coaxial electronic extensometer for round specimens from 11 to 18 mm dia.

      70-C0961/C2
      Coaxial electronic extensometer for round specimens from 17,5 to 26 mm dia.

      70-C0961/D1
      Coaxial electronic extensometer for round specimens from 26 to 36 mm dia.

      70 C0961/E
      Coaxial electronic extensometer to measure the elongation of strands from 9 to 15,2mm dia. up to failure. Gauge length: 600 mm; Max travel: 50 mm. 

      UNIVERSAL EXTENSOMETERS
      70-C0954/C1
      Standard electronic extensometer.
      Fitted with high precision electronic linear transducer. Maximum travel 10 mm, measuring base 200 mm. It has to be removed before sample failure.
       
      70-C0953/C
      Mechanical extensometer. Suitable flat samples up to 40 x 40 mm, rounds from 0.4 mm to 40 mm diameter. Base length: 50, 100 and 200 mm. Dial gauge 10 x 0.01mm.

      SMALL AND BIG SHEAR TEST ATTACHMENT
      70-T10/SH
      Small and big shear test attachment.

      SHOULDERED AND THREADED SPECIMENS TEST ATTACHMENT
      Standard: ASTM E8
      70-T10/ST
      Shouldered and Threaded specimens test accessory.
       
      NUT AND BOLT TEST ATTACHMENT
      Standards: ASTM F606, ISO 898-1
      70-T10/NB
      Nut and bolt test accessory for specimens from M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27,  M30, M33.
      Suitable for 70-T10H0x, 70-T12H0x and 70-T10T0x models.

      COMMON 180° & BEND REBEND TEST ATTACHMENT
      Standards: ASTM A615, EN 10080
      70-T10/BEN
      Common 180° & Bend Rebend Test attachment for bar up to 40 mm dia. 

      70-T10/50
      Loading element dia. 50 mm       
      N.B. loading elements ranging from dia.16mm up to dia.320mm available on request.

      WIRE ROPE TEST ATTACHMENT 
      Standards: ISO 3108, ASTM A1023
      70-T10/WR
      Wire rope tensile test attachment for wire ropes up to 10 mm dia.

      ACCESSORY FOR ELECTROWELDED SCREEN 
      70-C0901/20
      Test accessory for electrowelded  steel screen. Used with the standard grips for flat specimens.

      GRIPS FOR STRAND WIRES
      70-T10/SW
      Set of grips for stands testing.                                 
      Suitable for 70-T10H0x and 70-T10T0x models.               
                                 
      BRINELL TEST ATTACHMENT
      70-T10/BR
      Brinell test attachment, including 10 mm ball indentor.

      PULL OUT TEST OF STEEL REBARS
      Standards: ASTM A944
      70-T10/PO
      Pull out test attachment for concrete with 4 Nos of Sensors

      TEST ACCESSORY FOR SMALL ROUNDS (<12MM DIA) 
      70-T10/1
      Set of inserts for round dia. 5-12 mm (4 Pcs).

      ELASTIC MODULUS DETERMINATION ON CONCRETE 
      Standards: ASTM C469, EN 12390-13, ISO 6784, DIN 1048, BS 1888:121, UNI 6556
      55-C0222/G 
      Electronic universal compressometer-extensometer for cylinders and prisms. Supplied with adapter for small speci­mens, template for correct mounting and elastic bands holding the devices onto the specimen.
      NOTE: Other sensor types (such as strain gauges) are available on request. Ask our technical department.
       
      82-SW/EM
      E-MODULE Software for Poisson ratio and Elastic Modulus determination.
       
      COMPRESSION TESTS ON CONCRETE SPECIMENS
      Standards: ASTM C39, AASHTO T22
      70-T10/CC
      Set of compression platens 216 mm dia., with spherical seats, for compression tests on concrete cubes up to 150 mm and cylinders up to dia. 160 x 320 mm.
       
      FLEXURAL TESTS ON CONCRETE SPECIMENS
      Standards: ASTM C78, AASHTO T97, EN 12390-5
      50-C9010/B
      Flexural device for concrete beams 100x100x400/500 mm and 150x150x600/700 mm.
       
      SPLITTING TEST (INDIRECT TENSILE) ON CONCRETE SPECIMENS
      Standards: ASTM C496, EN 1338, EN 12390-6
      50-C9000/B
      Splitting tensile test device for cylinders up to dia. 160x320 mm, conforming to ASTM C496 and EN 12390-6.
      Weight approx..: 28 kg
       
      50-C9000/A
      Splitting tensile test device for cylinders  dia. 250x500 mm, conforming to  EN 12390-6.
      Weight approx..: 65 kg
       
      50-C9070/B
      Splitting tensile test device for cubes up to 150 and
       block pavers conforming to EN 1338  and EN 12390-6.
      Weight approx..: 28 kg
       
      50-C9002
      Hardboard packing strips 4x15x345 mm to EN1338 and EN 12390-6. Pack of 50.
       
      50-C9002/A
      Plywood packing strips 3x25x345 mm to ASTM C496. Pack of 50.
       
      50-C9001/A
      Hardboard packing strips 4x15x550 mm for 50-C9000/A. Pack of 50.

Related products

New products

Our locations


Follow us on