arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

700, 1000 kN UTM - HPT Series with UTM AUTO control unit

The most simple and convenient solution for Construction Laboratories

EN ISO 6892 | EN ISO 7500-1 | ASTM A370 | EN ISO 15630-1

Main Features

  • RUGGED FOUR COLUMN FRAME
    Extremely rigid four column frame with large vertical clearance suitable for tension and compression tests
  • FULL RANGE OF ACCESSORIES
    available to perform various tests, including Extensometers, Transverse and Bending test apparatus for steel, Compression and Indirect tensile test on concrete, etc. 
  • SOFTWATE PACKAGE 
    Data acquisition and test results elaboration by intuitive and very comprehensive software (included). 
  • tecnical specifications
    • Scroll the table
      TECHNICAL SPECIFICATIONS TABLE
      Model HTP-700 HTP-1000
      Code 70-T07P02 70-T10P02
      Cap. 700 kN 1000 kN
      Load sensor: Load cell Load cell
      For rounds  up to mm dia.: 70 70
      Set of grips for rounds dia. mm: 12 to 30 12 to 30
      30 to 50 30 to 50
      50 to 70 50 to 70
      For flats dim. mm. : 0 to 22 x 70 0 to 22 x 70
      22 to 44 x 70 22 to 44 x 70
      44 to 65 x 70 44 to 65 x 70
      Piston travel mm. 250 250
      Max adjustable tensile daylight mm: 50-850 50-850
      Max daylight between grippers [mm]* 600 600
      Max. compression daylight (without accessories) mm.: 0-850 0-850
      Horizontal daylight mm.: 750 750
      Maximum piston speed (no load condition) mm/min: 55 55
      Crosshead adjustable speed [mm/min] 360 @50 Hz 360 @50 Hz
      430 @60 Hz 430 @60 Hz
      Load resolution [kN] 0.01 0.01
      Crosshead displacement resolution [mm] 0.01 0.01
      Machine class 1 range (EN ISO 7500-1) 10-700 kN 10-1000 kN
      Overall dimensions:
      Frame,  LxDxH [m]
      Console, LxDxH [m]

      1,1 x 0,66 x 3,0/3,25
      0,8 x 0,9 x 1,55

      1,1 x 0,66 x 3,0/3,25
      0,8 x 0,9 x 1,55
      Weight approx.:
      Frame kg
      Console kg

      3700kg
      180 kg

      3700kg
      180 kg
      *Max distance between grips to exploit the full pisotn travel

      UTM-AUTO POWER AND CONTROL CONSOLE
      Hardware and firmware
      • 131.000 points effective resolution
      • Closed-loop P.I.D.control
      • 1 channel for load cell (included)
      • 1 channel to measure crosshead separation travel with high precision displacement transducer (included)
      • 1 channel to measure rebars elongation with extensometers (see Accessories)
      • digital linearization of the calibration curve (multi-coefficient)
      Tensile test:
      • Automatic test execution under load/stress control and grips separation control (by using the displacement transducer supplied with the machine) with closed loop PID control
      • Simultaneous display of load, stress and specimen elongation 
      • Possibility to overlap two elongation/stress graphs:
        • one obtained with the included displacement transducer measuring crosshead separation travel
        • one obtained with an optional extensometer (coaxial or universal)
      • Graphical test data option showing the load/elongation curve 
      Compression test:
      • Automatic test execution of compression tests with closed loop PID control
      • Simultaneous display of load and stress, load/time graph 
      Hydraulics
      • Dual stage pump: centrifugal low pressure for fast approach (max. flow rate 2.5 l/min ) automatically switching to radial multi- piston high pressure (max. flow rate 0.9 l/min) for loading
      • DC motor 1100 W
      • Maximum working pressure 700 bar
      • Oil tank capacity 9 l
      Software
      UTS Light data acquisition and processing software (included) for tensile test according to EN Standard allowing:   
      • Input of specimen identification, test and name of customer
      • real time downloading of test data
      • simultaneous display of stress/time and stress/elongation by using coaxial extensometer series or universal extensometer series (see Accessories) or displacment transducer reading crosshead separation travel (included)
      • elaboration of tension test results once test is completed: ReH, ReL or Rp, final elongation, etc. in conformity to EN ISO 6892-1 (method B) and EN 15630-1 (for steel rebars) when extensometer is adopted
      • unit of measurement: kN, mm, MPa
      • printout of test reports
      • multi-language software
  • ordering info
    • 70-T10P02
      Automatic Universal Testing Machine, 1000 kN cap. UTM AUTO control console. Supplied complete with upper and lower manually operated jaws, three set of grippers for rounds from 12 to 70 mm dia. and three set of grippers for flats from 22 x 70 to 65 x 70 mm, transverse test attachment and high precision load cell for load measurement.
      380 V, 50-60 Hz, 3 ph

      70-T10P04
      Same as above but 220 V, 60 Hz, 3 ph


      70-T07P02
      Automatic Universal Testing Machine, 700 kN cap. UTM AUTO control console. Supplied complete with upper and lower manually operated jaws, three set of grippers for rounds from 12 to 70 mm dia. and three set of grippers for flats from 22 x 70 to 65 x 70 mm, transverse test attachment and high precision load cell for load measurement.
      380 V, 50-60 Hz, 3 ph

      70-T07P04
      Same as above but 220 V, 60 Hz, 3 ph                    
  • accessories
    • ELECTRONIC COAXIAL EXTENSOMETERS
      These extensometers are basically made from three separate aluminium tubular sections, joined telescopically to one another. The middle section, delimited by the larger diameter, determines the measuring base, which is 5 times the diameter of the specimen. The two end sections consist of two mechanisms for gripping the specimen. One carries the electrical extensometer, the other an anvil.

      70-C0961/A2
      Coaxial electronic extensometer for round specimens from 5 to 11,5 mm dia.

      70-C0961/B2
      Coaxial electronic extensometer for round specimens from 11 to 18 mm dia.

      70-C0961/C2
      Coaxial electronic extensometer for round specimens from 17,5 to 26 mm dia.

      70-C0961/D1
      Coaxial electronic extensometer for round specimens from 26 to 36 mm dia.

      70-C0961/E
      Coaxial electronic extensometer to measure the elongation of strands from 9 to 15,2mm dia. up to failure.
      Gauge length: 600 mm; Max travel: 50 mm. 

      UNIVERSAL EXTENSOMETERS
      70-C0954/C1
      Standard electronic extensometer.
      Fitted with high precision electronic linear transducer. Maximum travel 10 mm, measuring base 200 mm. It has to be removed before sample failure.
       
      70-C0953/C
      Mechanical extensometer. Suitable flat samples up to 40 x 40 mm, rounds from 0.4 mm to 40 mm diameter. Base length: 50, 100 and 200 mm. Dial gauge 10 x 0.01mm.

      SMALL AND BIG SHEAR TEST ATTACHMENT
      70-T10/SH
      Small and big shear test attachment.

      SHOULDERED AND THREADED SPECIMENS TEST ATTACHMENT
      Standard: ASTM E8
      70-T10P/ST
      Shouldered and Threaded specimens test accessory.
      Suitable for 70-T07P0x and 70-T10P0x models.

      NUT AND BOLT TEST ATTACHMENT
      Standards: ASTM F606, ISO 898-1
      70-T10P/NB
      Nut and bolt test accessory for specimens from M12, M14, M16, M18, M20, M22, M24, M27,  M30, M33.
      Suitable for 70-T07P0x and 70-T10P0x models.

      COMMON 180° & BEND REBEND TEST ATTACHMENT
      Standards: ASTM A615, EN 10080
      70-T10/BEN
      Common 180° & Bend Rebend Test attachment for bar up to 40 mm dia. 

      70-T10/50
      Loading element dia. 50 mm       
      N.B. loading elements ranging from dia.16mm up to dia.320mm available on request.

      GRIPS FOR STRAND WIRES
      70-T10P/SW
      Set of grips for stands testing.     
      Suitable for 70-T07P0x and 70-T10P0x models.                            
                                 
      COMPRESSION TESTS ON CONCRETE SPECIMENS
      Standards: ASTM C39, AASHTO T22
      70-T10/CC
      Set of compression platens 216 mm dia., with spherical seats, for compression tests on concrete cubes up to 150 mm and cylinders up to dia. 160 x 320 mm.
       
      SPLITTING TEST (INDIRECT TENSILE) ON CONCRETE SPECIMENS
      Standards: ASTM C496, EN 1338, EN 12390-6
      50-C9000/B
      Splitting tensile test device for cylinders up to dia. 160x320 mm, conforming to ASTM C496 and EN 12390-6.
      Weight approx..: 28 kg
       
      50-C9000/A
      Splitting tensile test device for cylinders  dia. 250x500 mm, conforming to  EN 12390-6.
      Weight approx..: 50 kg
       
      50-C9070/B
      Splitting tensile test device for cubes up to 150 and
       block pavers conforming to EN 1338  and EN 12390-6.
      Weight approx..: 28 kg
       
      50-C9002
      Hardboard packing strips 4x15x345 mm to EN1338 and EN 12390-6. Pack of 50.
       
      50-C9002/A
      Plywood packing strips 3x25x345 mm to ASTM C496. Pack of 50.
       
      50-C9001/A
      Hardboard packing strips 4x15x550 mm for 50-C9000/A. Pack of 50.

Related products

New products

Our locations


Follow us on