arrow-backarrow-rightattachmentdownloadenvelopehomeinfo-requestinternetlinklogo-controls-grouplogo-controlsmagnifying-glassmainslider-arrow-leftmainslider-arrow-rightmarkerphoneshare-emailshare-facebookshare-google-plusshare-linkedinshare-pinterestshare-twitterslider-arrow-leftslider-arrow-rightsocial-facebooksocial-linkedinsocial-twittersocial-youtubeswipevideo

Automatic computerized 500/1000kN testing machines for steel and concrete

Automatic computerized system, 500 kN cap. in tension and 1000 kN cap. in compression (70-S12U02)
Controlling a second frame 3000 kN cap. for compression test and 150kN for flexure test
Test data input
Test execution
Test results
Universal Extensometer
Coaxial Extensometer

Main Features

  • For tensile tests up to 500 kN
  • Connectable to a second frame up to 5000 kN capacity for com­pression tests on concrete cubes, cylinders and block specimens, conforming to EN and ASTM
  • Can also be fitted with accessories for compression test
  • Fully automatic test cycle with closed-loop digital feedback
  • Double stage hydraulic pump with rapid approach and precise oil flow control
  • Adopts the latest ES technology for reduction of power consumption
  • Frame control expandable up to four, with active frame selection via software
  • Full conformity to EN ISO 7500-1, EN ISO 6892-1 (method B) and EN 15630-1 (for steel rebars)
  • Advanced data processing by intuitive and very comprehensive software
  • The AUTOMAX UTM control console can also be used for many other tests: flexure and splitting tests on concrete, compression tests on cement samples etc.
  • Elastic Modulus and Poisson ratio determination on concrete and cement specimens can be performed once upgraded with the suitable testing kit, including the testing frame and the relevant accessories. Ask our technical department for more details 
  • tecnical specifications
    • Scroll the table
       
      Frame
      • Load capacity in tension: 500 kN
      • Load capacity in compression: 1000 kN
      • tensile jaws including: 4 wedge grips for flats up to 13 mm thickness, 4  wedge grips for rounds up to 26 mm dia. and 2 sets of grips' liners 4 and 8 mm thick.
      • Maximum distance between grips (tensile mode): approx. 300 mm
      • Specimen length (tensile mode): approx. 500 mm
      • Max vertical clearance for compression (with 70-S0012/1): 695mm
      • Max. ram travel: 150 mm
      • Distance between columns: 310 mm
      • Overall dimensions approx (w x d x h).: 1350 x 700 x 1750 mm
      • Weight approx.: 550 kg
      AUTOMAX UTM Power and Control Console 
      Hardware
      • 131.000 points effective resolution
      • Closed-loop P.I.D.control
      • 4 channels for load sensors (pressure transducers and load cells)
      • 6 channels to measure rebars elongation with extensometers (see accessories) or strain/displacement under compression testing with LVDT and magnetostrictive transducers (see Related Products)
      • 4 channels for strain measurement with strain gauges
      • memorization of the calibration curve enabling sensors to be easily connected and immediately operated
      • digital linearization of the calibration curve (multi-coefficient)
      Hydraulics
      • Dual stage pump: centrifugal low pressure for fast approach and automatic switching to radial multi-piston high pressure for loading
      • DC motor 720 W, 50-60 Hz
      • Maximum working pressure 700 bar
      • Third and fourth frame option, active frame selection by software
      • Flow-sharing technology to perform loading and unloading cycles and advanced rebars testing in conformity to the Standards
      • ES Energy Saving technology
      User interface
      Fully PC controlled

      Software
      The AUTOMAX UTM is supplied complete with RTM (Real Time Management) user interface environment allowing:
      • Remote control of the complete system for automatic test execution: rapid platen approach, zeroing, test execution according to the selected test type, calculation of results, graphical and numerical management of results 
      • Active frame selection via software 
      • Automatic load measurement verification procedure via software by connecting our digital tester (model 82-P0801/E or 82-P0804/E) with a strain gauged calibration cell to the PC allowing automatic data acquisition and print-out of traceable calibration certificates
      • Storage of single and multiple tests
      • Printing of customized test reports both for single and multiple tests
      • Real time and deferred management of tests data and results, either in numeric and in graphic format 
      • Real sampling rate: 100 per second
      • Language settings, with selection between English, Italian, French, Spanish and "My language". This last option allows the operator to enter a another language different to the pre-defined ones (only Latin characters).
      • Measurement unit selection
      • Remote technical assistance/diagnostics via internet
      Several software packages, all running under RTM enviroment, have been specifically developed to meet the main International Standards. The following are available in the AUTOMAX UTM system:
      • UTS software (included), specifically designed for tensile testing under load/stress control and crosshead separation control (by using the displacement transducer supplied with the machine), allowing:
        • simultaneous display of: stress/ strain, stress/time; stress/%; strain/time and stress/elongation when extensometer is adopted (through coaxial extensometer series or universal extensometer), with possibility to display multi diagrams
        • elaboration of tension test results: ReH, ReL or Rp, final elongation, etc.in conformity to EN ISO 6892-1 (method B) and EN 15630-1 (for steel rebars)
      • DATAMANAGER software (included) for compression, flexure and indirect tensi­le test on concrete, cement specimens and other construction materials allowing:
        • Real time monitoring of test data and stress/time graph
        • Automatic failure load detection and storage
        • Cement testing to EN 196-1 guided test procedure
        • Saving of batch file with automatic calculation of avarage and standard deviation
      • E-MODULE software (optional, see Upgrading Options) for Poisson ratio and Elastic Modulus determination allowing:
        • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure
        • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs
        • Automatic verification of sample centering and sensors functionality, as per Standard requirements
        • Automatic calculation of Initial and Final secant Elastic Modulus values
  • ordering info
    • 70-S12U02
      Automatic computerized combined 500/1000 kN system, 500 kN for tensile testing on steel rebars up to 26mm diameter and 1000 kN for compression testing on concrete. Includes AUTOMAX UTM control console, frame fitted with jaws and grips for tensile testing to EN ISO 6892-1 (method B) and EN 15630-1. UTS and DATAMANAGER Software packages for tensile testing on steel and compression, flexure, indirect tensile testing on different kinds of construction materials are included. E-MODULE Software package avialble on request.                              
      230 V, 50-60 Hz, 1 ph.
       
      70-S12U04
      Same as above but 110 V, 60 Hz, 1 ph
  • accessories
    • For steel tensile testing 

      Coaxial extensometers

      70-C0961/A2
      Coaxial electronic extensometer for round specimens from 5 to 11.5 mm dia.

      70-C0961/B2
      Coaxial electronic extensometer for round specimens from 11 to 18 mm dia.

      70-C0961/C2
      Coaxial electronic extensometer for round specimens from 17.5 to 26 mm dia.

      Universal extensometers

      70-C0954/C1
      Universal electronic extensometer, measuring base 50 to 200 mm. Complete with case.
       

      For concrete compression testing
       

      70-S0012/1  
      Set of lower platen and upper platen with spherical seat, 216 mm dia., for testing cylinders up to dia. 160x320 mm and cubes from 100 to 150 mm. To be completed with the suitable distance pieces depending on the specimen height.
      Weight approx.: 45 kg

      Distance pieces
      Made of steel, these pieces are used to reduce the vertical clearance of the compression machine to a height that is appropriate for the size of the specimen and considering that, in general, the maximum piston travel is 150mm.

      Code Dimensions
      (diameter xheight, mm)
      50-C9080 200 x 30
      50-C9082 200 x 50
      50-C9083 200 x 68
      50-C9084 96 x 158
      50-C9086 200 x 100
      50-C9087 96 x 130
       
       
      70-S0012/2
      Front and rear fragment guard  

Related products

New products

Our locations


Follow us on