Gyratory compactor GYROCOMP

EN 12697-10 | EN 12697-31 | AASHTO T312 | SHRP M-002 | ASTM D6925

Gyrocomp Gyratory Compactor

Gyrocomp Gyratory Compactor and PC

Cylinder moulds

Cyinder moulds for cold mix compaction

Example of display

Low noise air compressor

Cylinder mould for Gyrocomp

Main Features

• tecnical specifications
  • Scroll the table
    • Compacted specimen size: 150 and 100 mm dia.
    • Sample height: 80 to 200 mm (150 mm)-50 to 125 mm (100 mm)
    • Consolidation pressure: 80 to 800 kPa (150 mm) -160 to 1400 kPa (100 mm)
    • Internal angle of gyration: Adjustable from 0.70 to 1.40 °.
      Preset to 1.16° internal angle (78-PV2522,  ASTM/AASHTO models)
      Preset to 0.82° internal angle (78-PV2522/E,  EN models)
    • Speed of gyration: adjustable from 20 to 60 rpm
    • Number of gyrations: adjustable up to 999
    • Test programmable either by number of gyrations or specimen height
    • Communication with PC: RS 232 connections
    • Internal memory: more than 200'000 tests
    • Power rating: 1000 W
    • Dimensions (including extruder bench, wxdxh): 502x753x1940 mm
    • Dimensions (wxdxh): 469x615x1130 mm
    • Weight approx.: 100 kg
• ordering info
  • 78-PV2522 
    GYROCOMP gyratory compactor, internal angle of gyration preset to 1.16° to AASHTO T312/ASTM D6925.
    230-110 V, 50-60 Hz, 1 ph
    
    
    78-PV2522/E 
    GYROCOMP gyratory compactor, internal angle of gyration preset to 0.82° l to EN 12697-31 Annex C.
    230-110 V, 50-60 Hz, 1 ph
    
    Note
    All models basically comply to EN 12697-10, EN 12697-31, ASTM D6925, AASHTO T312 and SHRP M-002. The only difference between the 78-PV2522  and the 78-PV2522/E  versions, is the angle of gyration, factory set to ASTM/AASHTO or to EN standards. This means that it is possible, with our intervention, to modify from one version to the other the angle of gyration.
    
• accessories
  • Cylinder moulds and distance plates
    
    78-PV0250/2
    Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded. Complete with top and bottom plates.
    
    78-PV0250/5
    Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded. Complete with top and bottom plates.
    
    78-PV0250/10
    Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates
    
    78-PV0250/8
    Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates
    
    78-PV0250/3 
    Distance plate, 150 mm dia., 50 mm high, for preparing short samples
    
    78-PV0250/6 
    Distance plate, 100 mm dia., 38 mm high, for preparing short samples
    
    78-PV0250/4 
    Accessories to compact 100 mm dia. specimens including 100 mm height calibration device
     
    
    Integrated work top with extruder
    
    78-PV2520/15 
    Integrated work top with electromechanical specimen extruder. 230 V, 50-60 Hz, 1 ph
    
    78-PV2520/15Z 
    Integrated work top with electromechanical specimen extruder. 110 V, 60 Hz, 1 ph
    
    Description 
    The bench top with extruder fits the GYROCOMP perfectly resulting in an ergonomic solution that aids the operator. The Electromechanical 550 W motor with speed reducer produces a maximum load that is also suitable for cold mix specimens.
    

    • Dimensions: 502x753x808(h) mm
    • Weight approx.: 45 kg

    78-PV0252/14 
    Integrated work top with manual extruder
    
     
    Air compressor
    
    78-PV0250/7 
    Low noise air compressor. 230 V, 50 Hz
    
    
    Description
    10 bar max. pressure, 130 l/min air delivery, 10 l cap., power rating 750 W, silent operation (less than 59 dB, ISO 3744, r=4 m).

    • Overall dimensions (wxdxh): 370x410x650 mm
    • Weight approx.: 27 kg

    
    Internal Angle Measurement Apparatus ILS
    78-PV0255