-
Cylinder moulds and distance plates
Made from special alloy steel, hardened to 53-55 HRC, internally grinded, Ra less than 1 µm, fully conforming to EN 12697-31 and exceeding ASTM D6925 and AASHTO T312
78-PV0250/2
Cylinder mould, 150 mm dia., complete with top and bottom plates.
78-PV0250/5
Cylinder mould, 100 mm dia., complete with top and bottom plates.
78-PV0250/10
Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates
78-PV0250/8
Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates
78-PV0250/3
Distance plate, 150 mm dia., 50 mm high, for preparing short samples.
78-PV0250/6
Distance plate, 100 mm dia., 38 mm high, for preparing short samples.
78-PV0250/4
Accessories for compacting 100 mm diameter specimens, including 100 mm height calibration device
Internal angle measurement apparatus
78-PV0255
ILS device for internal angle measurement for Gyratory compactors, conforming to EN 12697-31 annex B, ASTM D7115 and AASHTO T344. Complete with PC software, PC connection cable and traceable calibration certificate