High stiffness flexural frame, 200 kN cap., DUPLEX

EN 1339 | EN 1340 | EN 12390-5 | ASTM C78 | ASTM C293 | EN 14488-5 | ASTM C1609 | ASTM C1018

Testing FRC beams - Parallel testing mode

Testing long specimens - Orthogonal testing mode

Compression test

Detail of piston travel displacement transducer

Main Features

• tecnical specifications
  • Scroll the table

    Models		50-C1500/FR	50-C1501/FR
    		DUPLEX
    Max cap. kN		200	200
    Load sensor		Pressure Transducer	Load cell
    Horizontal clearance [mm]		720	720
    Max. vertical clearance [mm]*	with 50-C1500/1 (4 points)	210	210
    	with 50-C1500/1 (3 points)	304	304
    	with 50-C1500/2	225	225
    	with 50-C1500/2 + 50-C1500/3	290	290
    	with 50-C1500/2 + 50-C1500/4	165	165
    	with 50-C1500/7	445	445
    Distance between upper rollers (adjustable) mm		From 100 to 200, or single roller	From 100 to 200, or single roller
    Distance between lower rollers - Parallel testing mode (adjustable) mm		From 150 to 600	From 150 to 600
    Distance between lower rollers - Orthogonal testing mode (adjustable) mm		From 550 to 1000	From 550 to 1000
    Piston travel mm		130	130
    Overall dimensions (lxwxh) mm		956 x 1100 x 1188	956 x 1100 x 1188
    Weight approx. kg		250	265

    
    * The vertical daylight can be reduced by using the distance pieces already included useful to reduce the daylight by: 50mm and 100mm. Additional distance pieces are available as Accessories. 
• ordering info
  • 50-C1500/FR
    DUPLEX - Parallel and orthogonal testing mode -  200 kN cap. high rigidity flexural frame,  complete with pressure transducer and connection kit for separate control console. Rollers not included.
     
    50-C1501/FR
    DUPLEX - Parallel and orthogonal testing mode -  200 kN cap. high rigidity flexural frame, complete with load cell and connection kit for separate control console. Rollers not included.
     
    
• accessories
  • 50-C1500/1
    Upper and lower roller assembly for centre and third point test of concrete beams up to 200mm height, conforming to EN 12390-5 and ASTM C78, C1609, C1018, EN 14488-3, EN 14651.
    Bearers dimensions: 30 mm dia. x 210 mm long
    Weight approx: 40 kg
    
    50-C1500/11
    Same as above but 30 mm dia x 310 mm length.
    
    50-C1500/2
    Set of one upper and two lower roller assembly for testing paving flags, conforming to EN 1339
    Bearers dimensions: 40 mm dia. x 620 mm long
    Weight approx: 45 kg
    
    50-C1500/3
    Swivel jointed loading pad for testing kerbs, conforming to EN 1340. To be used with support bearers of 50-C1500/2.
    Weight approx: 5 kg
      
    50-C1500/4  
    Upper loading bearers to perform the third point and centre point flexure test to EN 12390-5, including two rollers 210 mm long, 40 mm diameter. To be used with support bearers of 50-C1500/2
    Weight approx.: 23 kg
    
    50-C1500/12
    Same as above but 40 mm dia. x 310 mm bearers
    
    50-C1500/5  
    Auxiliary testing frame for the measurement of deflection of FRC beams to EN 14488-3, 14651, ASTM C1609.
    
    50-C1500/6
    Accessory for testing sprayed concrete slab to EN 14488-5. Including supporting square base and spherically seated loading element. To be completed with displacement transducers 50-C1500/9 and 50-C1500/8. 
    Weight approx: 100 kg
     
    50-C1500/7
    Set of lower platen and upper platen spherically seated, 165 mm dia., for compression tests on small and low strength specimens.
    Weight approx:  19 kg
    
    50-C1500/8
    Displacement transducer with 50mm travel for reading displacement of sprayed concrete slab centre under concentrated load.
    
    50-C1500/9 
    100mm displacement transducer for measuring the piston travel. Complete with attachments.
    Weight approx: 1 kg
    
    50-C1500/50
    Distance piece 50mm thickness for flexure frame    
    
    50-C1500/80
    Distance piece 80mm thickness for flexure frame    
    
    50-C1500/R
    Rulers with graduation in inches