AUTOMAX MULTITEST computerized control console

ASTM C1550 | ISO 6784 | ASTM C469 | DIN 1048 | UNI 6556 | EN 14651 | EN 14488-3 | EN 14488-5 | EN 13412 | EN 13286-43 | ASTM C1609 | EN 12390-13 | BS 1888: 121

Main Features

• tecnical specifications
  • Scroll the table
    Hydraulics
    

    • Dual stage pump: centrifugal low pressure for fast approach and automatic switching to radial multi-piston high pressure for loading
    • DC motor. 720 W, 50-60 Hz
    • Maximum working pressure 700 bar
    • Third and fourth frame option, active frame selection by software
    • Flow-sharing technology to perform loading and unloading cycles
    • ES Energy Saving technology to reduce power consumption and silent operation

    Hardware
    

    • 131.000 points effective resolution
    • High frequency closed-loop P.I.D. control
    • Control frequency 500 Hz                       
    • Sampling rate 500 Hz      
    • 4 channels for load sensors (pressure transducers and load cells)
    • 6 channels to measure strain values with transducers (LVDT, magnetostrictive, potentiometetric)
    • 4 channels for strain measurement with strain gauges
    • Memorization of the calibration curve enables sensors to be connected and used immediately
    • Digital linearization of the calibration curve (multi-coefficient)

    PC and software
    
    Main software MULTITEST allows:
    
    

    • Remote control of the whole system and automatic execution of test including: fast approaching, zeroing, test execution, numerical and graphical management of test results, etc.   
    • Active frame selection via software  
    • Printing and saving of customized test reports both for single and batch tests in Excel format    
    • Multi-language selection, customizable with a further local language (only latin characters).
    • Automatic load measurement verification procedure including data acquisition and printing of traceable calibration certificates, when the PC is connected to the digital readout unit mod. 82-P0801/E and the suitable load cells
    • the use of 4 software packages each one tailored for a specific test method          
                                  

    DATAMANAGER software package (included) for compression, indirect tensile, 3 points and 4 points flexural tests on different types of specimens           
    
    E-MODULE software package (optional, see Upgrading Option) for Elastic modulus and Poisson ratio determination allowing: 

    • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure       
    • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs     
    • Automatic verification of sample positioning and sensors functionality, as per standards requirements     
    • Automatic calculation of test results as per Standards requirements

    UTS software package (optional, see Upgrading Option) for steel tensile testing allowing:
    • load/stress control
    • crosshead separation control
    • simultaneous display of: stress/elongation [mm], stress/time; stress/elongation [%] and elongation [mm]/time, with possibility to display multi diagrams
    • elaboration of tension test results: ReH, ReL or Rp, final elongation, etc. in conformity to EN ISO 6892-1 (method B) and EN 15630-1 (for steel rebars)

    
    D-Control software package (optional, see Upgrading Option) for displacement controlled tests allowing: 
    • Automatic calculation of test results according to EN 14651, 14488-3, 14488-5, UNI 11039-2, ASTM C1550, C1609, C947, UNE 83515           
    • 8 test pre-set testing procedures according to the above Standards                           
    • Customizable test procedure allowing desired loading history                               
    • Possibility to change in real time the test parameters: target load/displacement, control variable, test speed.                          

    Physical specifications
    
    Power rating: 700 W
    Dimensions (d x w x h): 650 x 500 x 1350 mm
    Weight approx.: 100 kg
    
    
• ordering info
  • 50-C20M82
    Automax Multitest stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included.
    230 V, 50-60 Hz, 1 ph. 
    
    50-C20M84
    Automax Multitest stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included.
    110 V, 60 Hz, 1 ph.
• accessories
  • ACCESSORIES FOR ELASTIC MODULUS
    Compressometer-Extensometer for Elastic Modulus determination
    Strain gauges
    \#axial_circumferential-compression-device\#
    
    TESTING FIBER REINFORCED CONCRETE AND SHOTCRETE
    Measurement of beam deflection and toughness
    Displacement transducer for measurement of crack opening
    Energy absorption test on slabs
    
    CONCRETE COMPRESSION FRAMES
    ASTM C39, AASHTO T22 Compression frames
    EN 12390-4, EN 772-1 Compression frames
    General utility compression frames
    
    CEMENT COMPRESSION FRAMES
    Compression-flexure cement testing frames
    Compression-flexure cement testing frames, multipurpose models
    
    FLEXURE FRAMES
    High stiffness flexural frame, 200 kN cap., SIMPLEX
    High stiffness flexural frame, 200 kN cap., DUPLEX
    High stiffness flexural frame, 350 kN cap., SIMPLEX
    High stiffness flexural frame, 350 kN cap., DUPLEX
    Universal, open structure flexural frame, 300 kN cap.
    
    TENSILE FRAME
    500/1000kN testing frame for steel and concrete testing