EN - PILOT PRO Automatic compression testers for cubes, cylinders and blocks

EN 12390-4 | EN 772-1

Main Features

• tecnical specifications
  • Scroll the table
    PILOT PRO AUTOMATIC POWER AND CONTROL SYSTEM
    
    Hydraulics
    • Dual-stage pump: centrifugal low pressure for fast approach automatically switches to radial multi-piston high pressure for loading
    • DC motor, 720W, 50-60Hz
    • Maximum working pressure 700 bar
    • Load/unload valve
    • Second/third frame selection valve available as option
    Hardware
    • 524,000 points high-resolution/stability analog channels
    • 3 channels for load sensors
    • Control frequency 250 Hz
    • Sampling frequency 250 Hz
    • 5.1”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
    • Unlimited storage capacity for test data on internal 16 GB SD card
    • USB port for test data storage on external USB memory stick and for firmware upgrade
    • Ethernet port for PC / Internet /network communication
    • Optional integrated graphic printer including Load-Time plot
    • RS 232 port for data downloading in ASCII format
    Firmware
    • Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
    • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
    • Possibility to reach at controlled speed a load target and to keep a steady loading phase.
    • Simultaneous display of load, specific load, actual load rate, load/time graph
    • Saving of the specimen failure type (to EN or ASTM) in the test results
    • Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
    • PC / network communication via Ethernet
    • Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
    • Recording facility for up to 10 test profiles for each channel including: type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time
    • Improved PID algorithm and Multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials (ACV, flexure, compression with neoprene pads, etc.)
    • Compatible with the newly released Datamanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
    • Peripheral devices integration and web services available as option (see page…)
    • Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
    • Language selection (including Cyrillic and Chinese)
    • Unit selection (kN, ton, lbf)
    • USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.
    PHYSICAL SPECIFICATION TABLE
    
    

    Model 50-	C47P02 C47P04	C57P02 C57P04	C69P02 C69P04	C79P02 C79P04
    Capacity kN	2000	3000	4000	5000
    Max vertical daylight ,  mm*	350	350	310	310
    Horizontal daylight mm	350	370	425	425
    Max. piston travel*, mm	50	50	50	50
    Platen dimensions	310 x 510 x 50 mm.	310 x 510 x 50 mm	310 x 510 x 90 mm	310 x 510 x 90 mm
    Platen surface hardness	55.5 HRC (600 HV)	55.5 HRC (600 HV)	55.5 HRC (600 HV)	55.5 HRC (600 HV)
    Platens flatness toll.	0.05 mm	0.05 mm	0.05 mm	0.05 mm
    Overall dimensions, mm	895x605x1115	985x640x1190	1090x690x1495	1090x690x1495
    Weight approx., kg	740	1105	2190	2190

    *Use distance pieces conforming to the specimen size to avoid piston overtravel
    
• ordering info
  • 50-C47P02
    PILOT PRO, Automatic Compact-Line compression tester, 2000 kN cap. for blocks, cubes up to 200 mm and cylinders up to dia. 160x320 mm. 230 V, 50-60 Hz, 1 ph
    
    50-C47P04
    Same as above but 110 V, 60 Hz, 1 ph
    
    50-C57P02
    PILOT PRO, Automatic Compact-Line compression tester, 3000 kN cap. for blocks, cubes up to 200 mm and cylinders up to dia. 160x320 mm. 230 V, 50-60 Hz, 1 ph
    
    50-C57P04
    Same as above but 110 V, 60 Hz, 1 ph
    
    50-C69P02
    PILOT PRO, Automatic Compact-Line compression tester, 4000 kN cap. for blocks, cubes up to 300 mm and cylinders up to dia. 150x300 mm. 230 V, 50-60 Hz, 1 ph
    
    50-C69P04
    Same as above but 110 V, 60 Hz, 1 ph
    
    50-C79P02 
    PILOT PRO, Automatic Compact-Line compression tester, 5000 kN cap. for blocks, cubes up to 300 mm and cylinders up to dia. 150x300 mm. 230 V, 50-60 Hz, 1 ph
    
    50-C79P04
    Same as above but 110 V, 60 Hz, 1 ph
    Note: 5000 kN capacity model available on request
• accessories
  • CONNECTIVITY PACKAGES
    
    Link-LAB Laboratory connectivity package
    

    50-KLAB/L

    LinK-LAB Local connectivity package for AUTOMAX Pro testers

     

    50-KLAB/E

    LinK-LAB Enterprise connectivity package for machines controlled by PC via Datamanager Software.

     

    11-D0630/24K

    24000 g cap. x 0.1g resolution, digital balance.

    230V/50-60Hz/1ph.

     

    82-D1655/K

    Digital caliper 300 x 0,05 mm   

     

    82-D1950/K 

    Barcode reader

     

    
    MACHINE ACCESSORIES 
    
    Distance pieces to adjust the vertical daylight
    50-C9080
    Distance piece dia. 200x30 mm
    
    50-C9082
    Distance piece dia. 200x50 mm
    
    50-C9083
    Distance piece dia. 200x68 mm
    
    50-C9086
    Distance piece dia. 200x100 mm
    Note: The above distance pieces are also available with threaded centering pin which are recommended for testing high strength/explosive failures specimens. They are identified adding the suffix /P after the code number.
    
    Frame pedestals 
    50-C49/B 
    Frame pedestal for 2000 kN cap. testers 
    
    50-C59/B 
    Frame pedestal for 3000 kN cap. testers
    
    Software 
    50-SW/DM
    Datamanager PC Software suitable for remote control of the machine, data acquisition, processing and filing.
    Allows printout of customized test certificates.
     
    Lifting assembly for block testing platens
    50-C9060/A
    Lifting device for bottom block platen for easier placement of distance pieces compatible platen size 310 x 510 x 50 mm thickness. Weight: 19 kg (approx.)
    
    50-C9060/B
    Lifting device for bottom block platen for easier placement of distance pieces compatible platen size 310 x 510 x 90 mm thickness. Weight: 18 kg (approx.)
    
    
    TEST ACCESSORIES
    
    Splitting tensile test devices
    50-C9000/C
    Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3”x12.6”).Conforming to EN 12390-6 and ASTM C496
    
    50-C9002
    Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to EN Standards. Pack of 50.
    
    50-C9002/A
    Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to ASTM Standards. Pack of 50.
    
    50-C9070/C
    Splitting tensile test device for concrete block pavers and concrete cubes. Conforms to EN 1338 and EN 12390-6.
    
    50-C9002
    Hardboard packing strips 4 x 15 x 345 mm, to EN 1338 and 12390-6.
    Pack of 50.
    
    Compression devices for cement and mortars
    50-C9030/H
    Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. High stiffness model.
    Total height 225mm.
    
    50-C9032/H
    Compression device to test 50mm (2”) cubes to ASTM C109. High stiffness model.
    Total height 225mm.
    
    Flexural test device for concrete beams
    50-C9010/C 
    Flexural test device for concrete beams 100x100x400/500 and 150x150x600/750 mm, to EN 12390-5, ASTM C78, ASTM C293 and AASHTO T97