ASTM C39, C140, AASHTO T22 Compression frames

ASTM C39 | AASHTO T22 | ASTM C140

• tecnical specifications
  • Scroll the table
    ASTM C39, AASHTO T22 TESTING FRAMES FOR CYLINDERS

    
    

    Models 50-	A12Z00 (A12Z10*)	A22Z00 (A22Z10*)	A32Z00 (A32Z10*)	A42Z00** (A42Z10*)	A52Z00** (A52Z10*)
    Capacity, kN (klbf)	1500 (330)	2000 (450)	3000 (660)	2000 (450)	3000 (660)
    Upper platen dim. mm (inch)	Dia. 165  (6.5")	Dia. 165  (6.5")	Dia. 165  (6.5")	Dia. 165  (6.5")	Dia. 165  (6.5")
    Lower platen dim. mm (inch)	Dia. 250 (9.8")	Dia. 165  (6.5")	Dia. 165  (6.5")	Dia. 300 (11.8")	Dia. 300 (11.8")
    Surface hardness	55 HRC	55 HRC	55 HRC	55 HRC	55 HRC
    Flatness tolerance, mm	0.02	0.02	0.02	0.02	0.02
    Ram travel mm	50 (2")	50 (2")	50 (2")	50 (2")	50 (2")
    Max. vertical daylight mm***	375 (14.7")	380 (15")	380 (15")	375 (14.7")	375 (14.7")
    Horizontal daylight mm	265 (10.4")	340 (13.4")	370 (14.6")	350 (13.8")	370 (14.6")
    For specimen size: Cylinders cm (dia.xh)	10x20 (4”x8”), 15x30 (6”x12”), 16x32	10x20 (4”x8”), 15x30 (6”x12”), 16x32	10x20 (4”x8”), 15x30(6”x12”), 16x32	10x20 (4”x8”), 15x30 (6”x12”), 16x32	10x20 (4”x8”), 15x30 (6”x12”), 16x32
    Overall dim. (lxdxh) mm	450x365x1090	540x440x1090	440x450x1160	650x450x1500 (including pedestal)	740x505x1550 (including pedestal)
    Weight approx. kg	250	465	665	665	1035
    Pedestal (optional)	50-A19/B	50-C29/B	50-C39/B	50-C49/B	50-C59/B
    Rigid front door (optional)	50-A19/FG	50-C29/FG	50-C39/FG	Included	Included

     

    * These machines are calibrated in lbf unit.
    ** High stiffness four column welded frame
    ***To be adjusted using the suitable distance pieces. See accessories
    
     

    ASTM C39, C140 TESTING FRAMES FOR BLOCKS AND CYLINDERS
     

    Models 50-	A29Z00 A29Z10*	A29Z00+A29/CYL A29Z10*+A29/CYL	A39Z00 A39Z10*	A39Z00+A29/CYL A39Z10*+A39/CYL
    Capacity, kN  (lbf)	2000 (450'000)	2000 (450'000)	3000 (660'000)	3000 (660'000)
    Platens dim., mm (inches)	310x410x90 mm (12.2”x16.1”x3.5” )	310x410x90 mm (12.2”x16.1”x3.5” ) + dia. 165 mm (6.5")	310x410x90 mm (12.2”x16.1”x3.5” )	310x410x90 mm (12.2”x16.1”x3.5” ) + dia. 165 mm (6.5")
    Ram travel, mm (inches)	50mm (2”)	50mm (2”)	50mm (2”)	50mm (2”)
    Max. vertical daylight , mm (inches)**	300 mm (11.8")	410 mm (16.1") / 300 mm (11.8" )	300 mm (11.8")	410 mm (16.1") / 300 mm (11.8" )
    Horizontal daylight inch , mm (inches)	370 mm (14.6")	370 mm (14.6")	370 mm (14.6")	370 mm (14.6")
    Overall dim. (lxdxh) , mm, without pedastal	800x520x1760mm	800x520x1760mm	800x520x1760mm	800x520x1760mm
    Weight approx., kg	975 kg	975 + (51 kg)	975 kg	975 + (51 kg)
    Pedestal	50-A29/B	50-A29/B	50-A29/B	50-A29/B
    Rigid front door	50-A29/FG	50-A29/FG	50-A29/FG	50-A29/FG

    
    

    * These machines are calibrated in lbf unit.
    **To be adjusted using the suitable distance pieces. See accessories
                           
    
    
• ordering info
  • ASTM C39, AASHTO T22 TESTING FRAMES FOR CYLINDERS
    

    ASTM compression frame for testing cylinders up to dia. 160x320 mm with or without capping retainers. Supplied complete pressure transducer, flexible plastic fragment guards and connection kit for separate control console. Pedestal and ridig front door not included, see accessories.

    
    1500 kN / 335 kLbf

    50-A12Z00

    ASTM compression frame 1500 kN cap.
    50-A12Z10

    as above but calibrated in lbf (cap. 335,000 lbf), when connected to any PCS.
    1500 kN / 450 kLbf

    50-A22Z00

    ASTM compression frame 2000 kN cap.
    50-A22Z10

    as above but calibrated in lbf (cap. 450,000 lbf),when connected to any PCS.

    3000 kN / 660 kLbf

    50-A32Z00

    ASTM compression frame 3000 kN cap.
    50-A32Z10

    as above but calibrated in lbf (cap. 660,000 lbf),when connected to any PCS.

    
    ASTM C39, AASHTO T22 TESTING FRAMES FOR CYLINDERS (HIGH STEIFFNESS MODELS)
    ASTM high stiffness compression frame for tetsing cylinders  up to dia. 160x320 mm with or without capping retainers. Supplied complete pressure transducer, connection kit for separate control console and rogod front door. Pedestal not included, see accessories.

     

    2000 kN cap.
    50-C42Z00       
    ASTM high stiffness compression frame 2000 kN cap.
    3000 kN cap.
    50-C52Z00       
    ASTM high stiffness compression frame 3000 kN cap.
     

    ASTM-AASHTO standalone frames for testing blocks and cylinders
    ASTM compression frame for testing blocks. Conversion set to test cylinders up to 6" x 12" to ASTM C39 available as accessory. Supplied complete pressure transducer, connection kit for separate control console and rgid front door. Pedestal not included, see accessories.
    
    3000 kN / 660 kLbf
    

    50-A39Z00

    ASTM compression frame 3000 kN cap.

    50-A39Z10

    as above but calibrated in lbf (cap. 660,000 lbf), when connected to any PCS.     

    
    
• accessories
  • TEST ACCESSORIES
    
    \#splitting-tensile-test-devices\#
    
    50-C9000/C
    Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3”x12.6”).Conforming to EN 12390-6 and ASTM C496
    
    50-C9002
    Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to EN Standards. Pack of 50.
    
    50-C9002/A
    Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to ASTM Standards. Pack of 50.
    
    50-C9070/C
    Splitting tensile test device for concrete block pavers and concrete cubes. Conforms to EN 1338 and EN 12390-6.
    
    \#compression-devices-for-cement-and-mortars\#
    
    50-C9030/H
    Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. High stiffness model.
    Total height 225mm.
    
    50-C9030
    Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. Total height 192mm.
    
    50-C9032/H 
    Compression device to test 50mm (2”) cubes to ASTM C109. High stiffness model.
    Total height 225mm.
    
    50-C9032
    Compression device to test 50mm (2”) cubes to ASTM C109. Total height 192mm.
    
    \#flexural-test-device-for-concrete-beams\#
    
    50-C9010/C 
    Flexural test device for concrete beams 100x100x400/500 and 150x150x600/750 mm, to EN 12390-5, ASTM C78, ASTM C293 and AASHTO T97
    
    \#distance-pieces-to-adjust-the-vertical-daylight\#
    
    65-L1000/20 
    Distance piece dia. 165x20 mm
    
    65-L1000/30 
    Distance piece dia. 165x30 mm
    
    65-L1000/40
    Distance piece dia. 165x40 mm
    
    65-L1000/68
    Distance piece dia. 165x68 mm
    
    50-C9080 
    Distance piece dia. 200x30 mm
    
    50-C9082 
    Distance piece dia. 200x50 mm
    
    50-C9083 
    Distance piece dia. 200x68 mm
    
    50-C9086 
    Distance piece dia. 200x100 mm
    
    Note: The above distance pieces are also available with threaded centering pin which are recommended for testing high strength/ explosive failures specimens. They are identified adding the suffix /P after the code number.
    
    Distance pieces for concrete compression machine, only for model 50-A39xxx
    
    65-L1000/40B  
    

    Slotted distance piece dia. 7.7"x1.6" height (dia. 195x450 mm height). Weight approx. 17.2 lbs (7.8 kg)
                                   

    65-L1000/50B  
    

    Slotted distance piece dia. 7.7"x2" height (dia. 195x50 mm height). Weight approx. 21.6 lbs (9.8 kg)     
                       

    65-L1000/68B  
    

    Slotted distance piece dia. 7.7"x2.7" height (dia. 195x68 mm height). Weight approx. 29.8 lbs (13.5 kg)

    
    MACHINE ACCESSORIES
    
    Pedestals
    50-C99/B Pedestal for A12Zx0
    50-C29/B Pedestal for A22Zx0
    50-C39/B Pedestal for A32Zx0
    50-C49/B Pedestal for C42Zx0
    50-C59/B Pedestal for C52Zx0
    50-C39/B1 Pedestal for A39Zx0
    
    Rigid front door
    50-C19/FG Rigid front door for A12Zx0
    50-C29/FG Rigid front door for A22Zx0
    50-C39/FG Rigid front door for A32Zx0
    
    

    Upgrade blocks compression machine for testing cylinders
    50-A39/CYL
    Accessory for compression machine models 50-A39Cxx for testing cylinders up to dia. 6"x12" (160 x 320 mm) to ASTM C39 and AASHTO T-22.