CONNECTIVITY PACKAGES
Link-LAB Laboratory connectivity package
50-KLAB/L
LinK-LAB Local connectivity package for AUTOMAX Pro testers
50-KLAB/E
LinK-LAB Enterprise connectivity package for machines controlled by PC via Datamanager Software.
11-D0630/24K
24000 g cap. x 0.1g resolution, digital balance.
230V/50-60Hz/1ph.
82-D1655/K
Digital caliper 300 x 0,05 mm
82-D1950/K
Barcode reader
MACHINE ACCESSORIES
Distance pieces to adjust the vertical daylight
50-C9080
Distance piece dia. 200x30 mm
50-C9082
Distance piece dia. 200x50 mm
50-C9083
Distance piece dia. 200x68 mm
50-C9086
Distance piece dia. 200x100 mm
Note: The above distance pieces are also available with threaded centering pin which are recommended for testing high strength/ explosive failures specimens. They are identified adding the suffix /P after the code number.
Firmware upgrade to perform displacement-controlled tests
50-FW/DC
Firmware package to perform displacement-controlled tests with an AUTOMAX PRO-M compression tester.
Software
50-SW/DM
Datamanager PC Software suitable for remote control of the machine, data acquisition, processing and filing.
Allows printout of customized test certificates.
82-SW/EM
E-Module software package for determination of young Modulus and Poisson’s ratio on concrete, cement, rocks allowing:
-
User-defined test cycles and step programmable sequences
-
Real-time display of stress/time, stress/axial strain and stress/lateral strain diagrams
-
Automatic verification of sample centring and sensor functioning, as per standards requirements
-
Automatic calculation of test results as per Standards requirements
82-SW/DC
D-Control software package for displacement controlled tests allowing:
-
Automatic calculation of test results according to EN 14651, 14488-3, 14488-5, UNI 11039-2, ASTM C1550, C1609, C947, UNE 83515
-
8 test pre-set testing procedures according to the above Standards
-
Customizable test procedure allowing desired loading history
-
Possibility to change in real time the test parameters: target load/displacement, control variable, test speed.
-
Data saving rate 250/sec
TEST ACCESSORIES
Accessories For Elastic Modulus
Compressometer-Extensometer for Elastic Modulus determination
Strain gauges
Axial-circumferential compression device
Testing fiber reinforced concrete and shotcrete
Measurement of beam deflection and toughness
Displacement transducer for measurement of crack opening
Energy absorption test on slabs
Splitting tensile test devices
50-C9000/C
Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3”x12.6”).Conforming to EN 12390-6 and ASTM C496
50-C9002
Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to EN Standards. Pack of 50.
50-C9002/A
Hardboard strips 4 x 14 x 345 mm for 50-C9000/C conf. to ASTM Standards. Pack of 50.
50-C9070/C
Splitting tensile test device for concrete block pavers and concrete cubes. Conforms to EN 1338 and EN 12390-6.
50-C9002
Hardboard packing strips 4 x 15 x 345 mm, to EN 1338 and 12390-6.
Pack of 50.
Compression devices for cement and mortars
50-C9030/H
Compression device to test portions of 40x40x160 prisms broken in flexure to EN 196-1. High stiffness model.
Total height 225mm.
50-C9032/H
Compression device to test 50mm (2”) cubes to ASTM C109. High stiffness model.
Total height 225mm.
Flexural test device for concrete beams
50-C9010/C
Flexural test device for concrete beams 100x100x400/500 and 150x150x600/750 mm, to EN 12390-5, ASTM C78, ASTM C293 and AASHTO T97