Stress path triaxial and uniaxial automatic test system

ASTM D2664 | ASTM D2938 | ASTM D3148 | ASTM D5407 | EN 14580 | EN 1926 | ISRM | ASTM D7012

50-C86Z10 Frame with Hoek cell, 32-C9842/RCK Advantest Rock, 32-C7022/RCK Sercomp Rock and 82-D2999 PC cabinet

ADVANTEST ROCK control console 50-C9842/RCK and 86-D2999 PC cabinet

ADVANTEST ROCK Triaxial tests: layout of the system

Hoek cell 32-D0556 supported by holding device model 32-D0556/H

Screenshot of a stress-path triaxial test on rock performed with the ADVANCED system (load vs. displacement and cell pressure vs. time diagrams)

ADVANTEST Software, Results of flexure test on a fiber reinforced concrete beam performed under deflection rate control

ADVANTEST Software, main screen shot of software used for strain displacement controlled tests

Virtual gauges indicating the actual reading of the sensor in percentage respect the full scale. It's an excellent tool for transducers positioning

Determination of Elastic Modulus using surface-mounted strain gauges

Specimen fitted with 55-C0222/F compressometers

Main Features

• tecnical specifications
  • Scroll the table
    ADVANTEST 9 ROCK
    Hydraulic group
    

    • Max. working pressure: 700 bar
    • Max. oil delivery: 2 lpm at low pressure, 0.7 lpm at high pressure
    • 4 hydraulic ports for connection of test frames
    • Flow control via servo-controlled proportional valve
    • Oil cooling system with forced ventilation
    • 4 ON/OFF valves with electronic control

    Hardware and on board software
    

    • Maximum resolution: 1/524,000 divisions
    • 8 input channels:
      • 4 for load sensors (load cells or pressure transducers)                
      • 4 for displacement transducers (potentiometric, LVDT amplified or analogical) and for deformation transducers (clip gauge, strain gauge).
    • Electrical characteristics of the conditioners:
      • V_EXC: from 0.5 to 10 V DC selected via software
      • Single/dual ended input
      • Input signal from -2.5 to +2.5 V DC
      • Zero and gain adjustable via software                                            
    • Data acquisition synchronized on all channels
    • 8 analogical outputs corresponding to each channel for possible use of an external data acquisition system
    • Test execution with control of:
      • Load/specific load                 
      • Displacement                                                 
      • Strain
    • Auto-diagnostic system including oil level and oil filter obstructed
    • 320x240 pixel display
    • Storage of multiple calibration curves for immediate connection of different sensors.
    • Low frequency Dynamic tests: max. frequency 0.1 Hz (depending on the wave amplitude)

    Phisical specifications
    

    • Power rating 750 W
    • Voltage: 230V, 50Hz, 1ph or 230V, 60Hz, ph or 110V, 60Hz, 1ph
    • Dimensions (lxwxh): 470x410x1000 mm
    • Weight approx.: 120 kg, excluding PC and printer

    
    SERCOMP 7 ROCK
    

    • Max. working pressure: 700 bar
    • Max oil delivery: 0.7 l/min
    • Flow control via servo-controlled proportional valve
    • 4 additional channels for strain / displacement transducers
    • Power rating: 750 W
    • Dimensions (LxWxH): 470x410x1000 mm
    • Weight approx.: 120 kg
    PC and SOFTWARE
    • PC and printer of the latest generation
    • Remotely control the entire system. Display graphical and numerical data including multi-plot mode, e.g. 3 different deformation curves with respect to a single time axis
    • Execute tests and sequences of steps/cycles programmable by the user
    • Print out test reports
    • Allow the real time modification of the test parameters during the test execution, including active control channel
    • Language selection: English, French, Spanish, Italian, plus another language which can be created by the user
• ordering info
  • ADVANTEST 9 ROCK
    
    32-C9842/RCK  
    Advantest 9, Servo-hydraulic unit for controlling up to four test frames for compression, flexure and indirect tensile tests with load, displacement and deformation control.Complete with PC, printer and software, including dedicated software module for rock testing under triaxial conditions (requires also the SERCOMP ROCK unit). 230 V, 50 Hz, 1 ph.
    
    32-C9843/RCK  
    Advantest 9, Servo-hydraulic unit for controlling up to four test frames for compression, flexure and indirect tensile tests with load, displacement and deformation control.Complete with PC, printer and software, including dedicated software module for rock testing under triaxial conditions (requires also the SERCOMP ROCK unit). 220 V, 60 Hz, 1 ph.
    
    32-C9844/RCK  
    Advantest 9, Servo-hydraulic unit for controlling up to four test frames for compression, flexure and indirect tensile tests with load, displacement and deformation control.Complete with PC, printer and software, including dedicated software module for rock testing under triaxial conditions (requires also the SERCOMP ROCK unit). 110 V, 60 Hz, 1 ph.
    
    
    SERCOMP 7 ROCK
    
    32-C7022/RCK  
    Sercomp Rock, servo-hydraulic control console for lateral pressure control, it can be used as a remotely controlled pressure unit, managed by the Advantest 9 Rock. 230 V,50 Hz, 1 ph
    
    32-C7023/RCK  
    Sercomp Rock, servo-hydraulic control console for lateral pressure control, it can be used as a remotely controlled pressure unit, managed by the Advantest 9 Rock. 220 V,60 Hz, 1 ph
    
    32-C7024/RCK  
    Sercomp Rock, servo-hydraulic control console for lateral pressure control, it can be used as a remotely controlled pressure unit, managed by the Advantest 9 Rock. 110 V,60 Hz, 1 ph
    
• accessories
  • Please refer to the links to other products below for more technical and commercial info about:
    

    • Compression frames
    • PC cabinet
    • Hoek cell and sample extruder
    • Strain gauges for uniaxial and triaxial tests
    • Compression device for uniaxial tests