High stiffness flexural frame, 200 kN cap., SIMPLEX

EN 1339 | EN 1340 | EN 12390-5 | ASTM C78 | ASTM C293 | EN 14488-5 | ASTM C1609 | ASTM C1018

Testing FRC beams to ASTM C1609, EN 14488-3 with 200kN high stiffness frame 50-C1511/FR. See Additional Information

CMOD testing to EN 14651 with 200kN high stiffness frame 50-C1511/FR. See Additional Information

Flexure testing on concrete beams with 200kN high stiffness frame 50-C1511/FR.

Flexure testing on concrete flagstones with 200kN high stiffness frame 50-C1511/FR.

Detail of piston travel displacement transducer

Main Features

• tecnical specifications
  • Scroll the table

    Models		50-C1510/FR	50-C1511/FR
    		SIMPLEX
    Max cap. kN		200	200
    Load sensor		Pressure Transducer	Load cell
    Horizontal clearance [mm]		720	720
    Max. vertical clearance [mm]*	with 50-C1500/1 (4 points)	210	210
    	with 50-C1500/1 (3 points)	304	304
    	with 50-C1500/2	225	225
    	with 50-C1500/2 + 50-C1500/3	290	290
    	with 50-C1500/2 + 50-C1500/4	165	165
    	with 50-C1500/7	445	445
    Distance between upper rollers (adjustable) mm		From 100 to 200, or single roller	From 100 to 200, or single roller
    Distance between lower rollers (adjustable) mm		From 150 to 600	From 150 to 600
    Piston travel mm		130	130
    Overall dimensions (lxwxh) mm		956 x 496 x 1188	956 x 496 x 1188
    Weight approx. kg		235	240

    
    * The vertical daylight can be reduced by using the distance pieces already included useful to reduce the daylight by: 50mm and 100mm. Additional distance pieces are available as Accessories. 
• ordering info
  • 50-C1510/FR
    SIMPLEX - 200 kN cap. high rigidity flexural frame,  complete with pressure transducer and connection kit for separate control console. Rollers not included.
     
    50-C1511/FR
    SIMPLEX - 200 kN cap. high rigidity flexural frame, complete with load cell and connection kit for separate control console. Rollers not included.
     
    
• accessories
  • 50-C1500/1
    Upper and lower roller assembly for centre and third point test of concrete beams up to 200mm height, conforming to EN 12390-5 and ASTM C78, C1609, C1018, EN 14488-3, EN 14651.
    Bearers dimensions: 30 mm dia. x 210 mm long
    Weight approx: 40 kg
    
    50-C1500/11
    Same as above but 30 mm dia x 310 mm length.
    
    50-C1500/2
    Set of one upper and two lower roller assembly for testing paving flags, conforming to EN 1339
    Bearers dimensions: 40 mm dia. x 620 mm long
    Weight approx: 45 kg
    
    50-C1500/3
    Swivel jointed loading pad for testing kerbs, conforming to EN 1340. To be used with support bearers of 50-C1500/2.
    Weight approx: 5 kg
      
    50-C1500/4  
    Upper loading bearers to perform the third point and centre point flexure test to EN 12390-5, including two rollers 210 mm long, 40 mm diameter. To be used with support bearers of 50-C1500/2
    Weight approx.: 23 kg
    
    50-C1500/12
    Same as above but 40 mm dia. x 310 mm bearers
    
    50-C1500/5  
    Auxiliary testing frame for the measurement of deflection of FRC beams to EN 14488-3, 14651, ASTM C1609.
    
    50-C1500/6
    Accessory for testing sprayed concrete slab to EN 14488-5. Including supporting square base and spherically seated loading element. To be completed with displacement transducers 50-C1500/9 and 50-C1500/8. 
    Weight approx: 100 kg
     
    50-C1500/7
    Set of lower platen and upper platen spherically seated, 165 mm dia., for compression tests on small and low strength specimens.
    Weight approx:  19 kg
    
    50-C1500/8
    Displacement transducer with 50mm travel for reading displacement of sprayed concrete slab centre under concentrated load.
    
    50-C1500/9 
    100mm displacement transducer for measuring the piston travel. Complete with attachments.
    Weight approx: 1 kg
    
    50-C1500/50
    Distance piece 50mm thickness for flexure frame    
    
    50-C1500/80
    Distance piece 80mm thickness for flexure frame    
    
    50-C1500/R
    Rulers with graduation in inches