1000, 1200, 1500, 2000 kN UTM - HPT Series with HPU 200 control unit

The ideal solution for Central Laboratories

EN ISO 6892 | EN ISO 7500-1 | ASTM A370 | EN ISO 15630-1

Main Features

• tecnical specifications
  • Scroll the table
    TECHNICAL SPECIFICATIONS TABLE
    
    

    Model	HTP-1000	HTP-1200	HTP-1500	HTP-2000
    Code	70-T10H02	70-T12H02	70-T15H02	70-T20H02
    Cap.	1000 kN	1200 kN	1500 kN	2000 kN
    Load sensor	High accuracy load cell	High accuracy load cell	High accuracy load cell	High accuracy load cell
    For rounds up to mm dia.	60	60	60	78
    Set of grips for rounds mm dia.	8 to 18 12 to 30 25 to 38 38 to 50	8 to 18 12 to 30 28 to 40 38 to 50	8 to 18 12 to 30 28 to 40 38 to 50	12 to 30 30 to 42 42 to 54 54 to 66 66 to 78
    For flats mm	0 to 20 x 90 20 to 40 x 90 40 to 60 x 90	0 to 15 x 100 15 to 30 x 100 30 to 45 x 100 45 to 60 x 100	0 to 15 x 100 15 to 30 x 100 30 to 45 x 100 45 to 60 x 100	0 to 18 x 100 18 to 36 x 100 36 to 54 x 100 54 to 72 x 100
    Piston travel mm	250	250	250	300
    Max adjustable tensile daylight mm	50-850	50-850	50-850	50-850
    Max daylight between grippers mm*	600	600	600	550
    Max compression daylight (without accessories) mm	0-850	0-850	0-850	0-850
    Horizontal daylight mm	750	750	750	850
    Maximum piston speed (no load condition) mm/min	190	100	100	100
    Crosshead adjustable speed mm/min	360 @ 50 Hz 430 @ 60 Hz	275 @ 50 Hz 330 @ 60 Hz	275 @ 50 Hz 330 @ 60 Hz	225 @ 50 Hz 275 @ 60 Hz
    Load resolution kN	0,01	0,02	0,02	0,02
    Crosshead displacement resolution mm	0,01	0,01	0,01	0,01
    Machine class 1 range (EN ISO 7500-1)	10-1000 kN	12-1200 kN	15-1500 kN	20-2000 kN
    Overall dimensions:  Frame, l x d x h Console, l x d x h	1,1 x 0,66 x 3,0/3,25 0,8 x 0,9 x 1,55	1,2 x 0,9 x 3,25/3,5 0,8 x 0,9 x 1,55	1,2 x 0,9 x 3,25/3,5 0,8 x 0,9 x 1,55	1,5 x 1,0 x 3,7/4,0 0,8 x 0,9 x 1,55
    Weight approx.: Frame kg Console kg	3700 kg 180 kg	6000 kg 180 kg	6000 kg 180 kg	8000 kg 180 kg

    *Max distance between grips to exploit the full pisotn travel
    
    HPU POWER AND CONTROL CONSOLE
    Hardware
    
    • 131.000 points effective resolution
    • Control frequency 250 Hz
    • Sampling rate 500 Hz
    • Closed-loop P.I.D.control
    • 6 channels (one dedicated to crosshead displacement) to measure elongation/displacement/strain with potentiometric, conditioned LVDT and magnetostrictive transducers
    • 4 channels for strain measurements with strain gauges
    • 2 channels for load sensors: load cell and load  cell/pressure transducer of possible second frame
    • simple multi-sensors connection and calibration file selection
    • digital linearization of the calibration curve. (multi-coefficient)
    Hydraulics
    • Dual stage pump: centrifugal low pressure for fast approach (max. flow rate 9 l/min ) automatically switching to radial multi- piston high pressure (max. flow rate 3.2 l/min) for loading
    • Oil flow control by servo-controlled proportional valve
    • AC motor 3000 W
    • Maximum working pressure 700 bar
    • Oil temperature controlled by air cooling system
    • Console cabinet lined with soundproofing  material for operator's comfort.
    • Tank capacity: 30 liters
    MANAGEMENT SOFTWARE AND SOFTWARE PACKAGES 
    HPT Universal testers are supplied complete with RTM (Real Time Management) user interface environment allowing:
    • Remote control of the complete system for automatic test execution: quick platen approach, zeroing, test execution according to the selected test type, calculation of results, graphical and numerical management of results
    • Storage of single and multiple tests
    • Printing of customized test reports for both single and multiple tests
    • Real time and deferred management of tests data and results, either in numeric or in graphic format
    • Language selection (Latin characters only)
    • Units selection
    • Remote technical assistance/diagnostic via internet
    The following Software packages are also included in the system:
    
    • UTS Software Specifically designed for tensile testing under load/stress control and crosshead separation control (by using the displacement transducer supplied with the machine), allowing:
      • Simultaneous display of stress/time,  stress/elongation %, elongation/time and  stress/elongation;
      • Possibility to overlap two elongation/stress graphs: one obtained with the included displacement transducer measuring crosshead separation travel and the other obtained w ith an optional extensometer (coaxial or universal);
      • Elaboration of tension test results: ReH, ReL or  Rp (calculated at three different elongation percentages selectable by the user), A, Ag, At, Agt, Ae, Rt, Z, elastic modulus E, etc, conforming to EN ISO 6892-1 and EN 15630-1 for steel rebars.
    • DATAMANAGER Software For compression, flexure and indirect tensile test on concrete, cement specimens and other construction materials allowing:
      • Real time monitoring of test data and stress/time graph
      • Automatic load detection failure and storage
      • Cement testing to EN 196-1 guided test procedure
      • Saving of batch file with automatic calculation of average and standard deviation
    The following software package is available as option when upgrading the machine with the hydraulic system for a second frame connection (see 70-T10/2F).  
    • E-MODULE software For Poisson ratio and Elastic Modulus determination on concrete specimens allowing:
      • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure
      • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs
      • Automatic verification of sample centering and sensors functionality, as per Standard requirements
      • Automatic calculation of Initial and Final secant Elastic Modulus values
• ordering info
  • 1000kN CAPACITY
    
    70- T10H02
    HPT-1000, Automatic Computerized Universal Testing Machine, 1000 kN cap. HPU 200 control console. Load measurement by high precision load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, four set of grippers for rounds from 8 to 50 mm dia., three set of grippers for flats from 20 x 90 to 60 x 90 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials. 380 V, 50 Hz, 3 ph.
    
    70- T10H03
    Same as above but 380 V, 60 Hz, 3 ph
    
    70- T10H04
    Same as above but 220 V, 60 Hz, 3 ph
    
    1200kN CAPACITY
    
    70- T12H02
    HPT 1200, Automatic Computerized Universal Testing Machine, 1200 kN cap. HPU 200 control console. Load measurement by high precision load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 60 mm dia., four set of grippers for flats from 15 x 100 to 60 x 100 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials.
    380 V, 50 Hz, 3 ph.
    
    70- T12H03
    Same as above but 380 V, 60 Hz, 3 ph
    
    70- T12H04
    Same as above but 220 V, 60 Hz, 3 ph
     
    1500kN CAPACITY
    
    70- T15H02
    HPT 1500, Automatic Computerized Universal Testing Machine, 1500 kN cap. HPU 200 control console. Load measurement by high precision  load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 60 mm dia., four set of grippers for flats from 15 x 100 to 60 x 100 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials.
    380 V, 50 Hz, 3 ph.
     
    70- T15H03
    Same as above but 380 V, 60 Hz, 3 ph
    
    70- T15H04
    Same as above but 220 V, 60 Hz, 3 ph
    
    2000kN CAPACITY 
    
    70- T20H02
    HPT 2000, Automatic Computerized Universal Testing Machine, 2000 kN cap. HPU 200 control console. Load measurement by high precision  load cell. Supplied complete with PC, upper and lower hydraulically operated jaws, three set of grippers for rounds from 12 to 78 mm dia., four set of grippers for flats from 18 x 100 to 72 x 100 mm and transverse test attachment. Including also Management software and Software packages for tensile steel testing, compression flexural and indirect tensile testing on concrete and other similar materials.
    380 V, 50 Hz, 3 ph.
    
    70- T20H03
    Same as above but 380 V, 60 Hz, 3 ph
    
    70- T20H04
    Same as above but 220 V, 60 Hz, 3 ph
    
• accessories
  • ELECTRONIC COAXIAL EXTENSOMETERS
    70-C0961/F
    

    Coaxial electronic extensometer for round specimens from 4 to 16 mm dia.              

    Gauge length: 200 mm. Travel: 50 mm.      

    
    70-C0961/G
    

    Coaxial electronic extensometer for round specimens from 16 to 40 mm dia.              

    Gauge length: 200 mm. Travel: 75 mm.   
                        

    70 C0961/E
    Coaxial electronic extensometer to measure the elongation of strands from 9 to 15,2mm dia. up to failure. Gauge length: 600 mm; Max travel: 50 mm. 
    
    
    UNIVERSAL EXTENSOMETERS
    70-C0954/C1
    Standard electronic extensometer.
    Fitted with high precision electronic linear transducer. Maximum travel 10 mm, measuring base 200 mm. It has to be removed before sample failure.
     
    70-C0953/C
    Mechanical extensometer. Suitable flat samples up to 40 x 40 mm, rounds from 0.4 mm to 40 mm diameter. Base length: 50, 100 and 200 mm. Dial gauge 10 x 0.01mm.
    
    
    SMALL AND BIG SHEAR TEST ATTACHMENT
    70-T10/SH
    Small and big shear test attachment.
    
    
    SHOULDERED AND THREADED SPECIMENS TEST ATTACHMENT
    Standard: ASTM E8
    70-T10/SAT
    Shouldered and Threaded specimens test accessory.
    To be completed with suitable bare attachment 70-TXX/BA
    
    70-T10/BA
    Bare attachment for Shouldered and Threaded specimens test accessory. Suitable for 70-T10H0X and 70-T10T0X.
    
    70-T15/BA
    Bare attachment for Shouldered and Threaded specimens test accessory. Suitable for 70-T12H0X and 70-T15H0X.
    
    70-T20/BA
    Bare attachment for Shouldered and Threaded specimens test accessory. Suitable for 70-T20H0X 
    
     
    NUT AND BOLT TEST ATTACHMENT
    Standards: ASTM F606, ISO 898-1
    70-T10/NAB
    Nut and bolt test accessory for specimens from M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27,  M30, M33. Max bolt length 250mm.
    To be completed with bare attachment 70-TXX/BA1
    Suitable for 70-T10H0X, 70-T10T0x, 70-T12H0X and 70-T15H0X models
    
    70-T20/NAB 
    Nut and bolt test accessory for specimens from M10, M12, M14, M16, M18, M20, M22, M27, M27,  M30, M33, M39, M42, M45, M48, M52, M56 and M64 (max 12.9 grade). Max bolt length 250mm.
    To be completed with bare attachment 70-T20/BA1 
    Suitable for 70-T20H0X model
    
    70-T10/BA1
    Bare attachment for nut and bolt test accessory. Suitable for 70-T10H0X and 70-T10T0X.
    
    70-T15/BA1
    Bare attachment for nut and bolt test accessory. Suitable for 70-T12H0X and 70-T15H0X.
    
     70-T20/BA1
    Bare attachment for nut and bolt test accessory. Suitable for 70-T20H0X.
    
    
    COMMON 180° & BEND REBEND TEST ATTACHMENT
    Standards: ASTM A615, EN 10080
    70-T10/BEN
    Common 180° & Bend Rebend Test attachment for bar up to 40 mm dia. 
    
    70-T10/50
    Loading element dia. 50 mm       
    N.B. loading elements ranging from dia.16mm up to dia.320mm available on request.
    
    
    ACCESSORY FOR ELECTROWELDED SCREEN 
    70-C0901/20
    Test accessory for electrowelded  steel screen. Used with the standard grips for flat specimens.
    
    
    ELASTIC MODULUS DETERMINATION ON CONCRETE 
    **When the system is upgraded for a second frame connection and control  by a special hydraulic valve system (70-T10/2F). See Upgrading options.**
    Standards: ASTM C469, EN 12390-13, ISO 6784, DIN 1048, BS 1888:121, UNI 6556
    
    55-C0222/G 
    Electronic universal compressometer-extensometer for cylinders and prisms. Supplied with adapter for small speci­mens, template for correct mounting and elastic bands holding the devices onto the specimen.
    
    NOTE: Other sensor types (such as strain gauges) are available on request. Ask our technical department.
     
    82-SW/EM
    E-MODULE Software for Poisson ratio and Elastic Modulus determination.
    
     
    COMPRESSION TESTS ON CONCRETE SPECIMENS
    Standards: ASTM C39, AASHTO T22
    70-T10/CC
    Set of compression platens 216 mm dia., with spherical seats, for compression tests on concrete cubes up to 150 mm and cylinders up to dia. 160 x 320 mm.
     
    
    FLEXURAL TESTS ON CONCRETE SPECIMENS
    Standards: ASTM C78, AASHTO T97, EN 12390-5
    50-C9010/C
    Flexural device for concrete beams 100x100x400/500 mm and 150x150x600/700 mm.
     
    
    SPLITTINGTEST (INDIRECT TENSILE) ON CONCRETE SPECIMENS
    Standards: ASTM C496, EN 1338, EN 12390-6
    50-C9000/C
    Splitting tensile test device for cylinders up to dia. 160x320 mm, conforming to ASTM C496 and EN 12390-6.
    Weight approx..: 32 kg
     
    50-C9000/A
    Splitting tensile test device for cylinders  dia. 250x500 mm, conforming to  EN 12390-6.
    Weight approx..: 65 kg
     
    50-C9070/C
    Splitting tensile test device for cubes up to 150 and
     block pavers conforming to EN 1338  and EN 12390-6.
    Weight approx..: 28 kg
     
    50-C9002
    Hardboard packing strips 4x15x345 mm to EN1338 and EN 12390-6. Pack of 50.
     
    50-C9002/A
    Plywood packing strips 3x25x345 mm to ASTM C496. Pack of 50.
     
    50-C9001/A
    Hardboard packing strips 4x15x550 mm for 50-C9000/A. Pack of 50.